Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
Applications & Uses
- Applications
- Compatible Substrates & Surfaces
- Suggested Applications
ADDITOL® LED 01 has been developed for UV LED applications, but is equally suitable for other low energy curing applications (e.g. UV-A curing).
ADDITOL® LED 01 can also be used for reduction of oxygen inhibition in UV/EB curable systems, when cured with the standard medium pressure HG lamps
Properties
- Physical Form
- Appearance
- Transparent liquid
- Physical Properties
| Value | Units | Test Method / Conditions | |
| Density | 1.17 | g/cm³ | — |
| Dynamic Viscosity (25°C) | 210 | mPa.s | — |
Technical Details & Test Data
- Product Compatibility
ADDITOL® LED 01 is compatible with a broad range of selected resins of different chemical families, like urethane acrylates, polyester – and epoxy acrylates.
ADDITOL® LED 01 is nevertheless not compatible with all resins and it is recommended to check its compatibility prior to use. Resins containing amines have a limited compatibility with ADDITOL® LED 01.
ADDITOL® LED 01 is also compatible with acidic additives like adhesion promoters.
Safety & Health
- Precautions
The following is a summary of the precautions to be taken when handling this product. Please refer to the Safety Data Sheet for further details.
The toxicological properties of this material have not been fully determined. Products of this type can be expected to be eye and skin irritant and have the potential to cause sensitization or other allergic responses. Appropriate precautions should be taken to avoid eye and skin contact and to avoid inhalation of the aerosols or vapors. Consult the relevant Safety Data Sheet for appropriate handling procedures and protective equipment prior to using this or any other material referred to in this bulletin.
Storage & Handling
- Shelf Life
- 1 Year
- Storage and Handling
Care should be taken not to expose radiation curable products to temperatures exceeding 40°C for prolonged periods or to direct sunlight. This might cause uncontrollable polymerization of the product with generation of heat.
Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Do not store this material under an oxygen free atmosphere.
Use dry air to displace material removed from the container. This material should not be stored for more than 1 year.