ADDITOL® XL 6568

1 of 182 products in this brand
ADDITOL® XL 6568, a cutting-edge solution, brings a host of benefits as an APEO-free and bio-based formulation. With features like corrosion resistance, faster cycle time, good peel, high film thickness, and high gloss, it stands out in coatings. Its special properties make it an excellent addition to stripping enamels as an anti-adhesion promotor, offering temporary protection against mechanical attack and corrosion to various substrates. Notably, it can be utilized in both solvent-based and aqueous systems.

End Uses: Clearcoat, Enamel

Labeling Claims: APEO-free, Bio-based

Features: Corrosion Resistance, Faster Cycle Time, Good Peel, High Film Thickness, High Gloss

Technical Data Sheet

Knowde Enhanced TDS

Identification & Functionality

CASE Ingredients Functions
Technologies

Features & Benefits

Labeling Claims
Special Properties

For the formulation of stripping enamels, release agents and temporary corrosion protection

Special Properties
  • Additol XL 6568 is added to stripping enamels as anti adhesion promotor. Coatings of this nature give temporary protection against mechanical attack and corrosion to various substrates. Such coatings can easily be pealed off later.
  • Additol XL 6568 can be used in solvent based as well as in aqueous systems. Suitable binders for solvent based systems are the Hostaflex grades CM 150 and CM 133 as well as the Mowital grades B30HH and B60H.
  • To formulate aqueous systems, acrylic dispersions like Ucecryl B 3022 are recommended. While solvent based release coatings can easily be removed from metallic substrates aqueous systems based on styrene acrylate dispersions can also be removed from glass, pottery, wood and plastics.
  • For formulating systems with high film strength aqueous systems are more suitable than solvent based systems.
Distinguishing Features

Additol XL 6568 is a non-hazardous alternative to Additol VXL 1105

Applications & Uses

Compatible Substrates & Surfaces
Coating Type
Use Level
2 - 5% total
Processing Information

Additol XL 6568 is soluble in water and most solvents. In mineral oils slightly cloudy solutions are obtained. For solvent based systems the use of 2 - 3 % on total solids is sufficient. In aqueous systems 2 - 5 % is recommended.

Properties

Appearance
Clear

Packaging & Availability

Regional Availability
  • Africa
  • China
  • Europe
  • Latin America
  • Middle East
  • North America

Storage & Handling

Storage and Handling

At temperatures up to 25 °C storage stability packed in original containers amounts to at least 730 days. Additol XL 6568 becomes wax-like at temperatures below 0 °C. It turns liquid again by carefully warming up to room-temperature. The product is not damaged by the process. Lowest storage temperature: 0 °C