Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
- Distinguishing Features
In comparison to BECKOPOX™ EP 384w chemical resistance of BECKOPOX™ EP 2350w is higher, penetration into porous substrates is better and drying is slower.
Applications & Uses
- Markets
- Applications
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
- Coating Type
- Special Properties and Uses
BECKOPOX™ EP 2350w/60WA is a solid epoxy resin dispersion in water with improved chemical resistance. In combination with suitable amine hardeners such as BECKOPOX™ EH 613w or BECKOPOX™ EH 623w fast drying coatings for metallic and mineral substrates can be formulated. BECKOPOX™ EP 2350w is not shear stable. Grinding of pigments and fillers shall be done in the hardener.
- Suggested Uses and Processing Information
MIXING RATIO AND POT LIFE
A blend of 100.0g BECKOPOX™ EP 2350w/60WA, 25.0g BECKOPOX™ EH 613w/80WA 30.0g deionized water has a processing time at 23°C of approx. 60 min. The end of processing time can not be seen by an increase of viscosity or gelation. Therefore it is necessary to use the material within the stated time limit. The substrate temperature should not be below 12°C and the relative humidity not above 80%.
Properties
- Physical Form
- Typical Properties
Value | Units | Test Method / Conditions | |
Flash Point (CCCFP) | min. 94 | °C | — |
Density (20°C) | approx. 1.11 | g/cm³ | — |
Dynamic Viscosity (100 s⁻¹, 23°C) | 1000 - 9000 | mPa.s | — |
Epoxy Equivalent (Solids) | 300 - 400 | g/mol | — |
Epoxy Equivalent (Form of Delivery) | 520 - 640 | g/mol | — |
Non-Volatile Matter Analogue (1h, 160°C, 1g) | 58 - 62 | % | — |
Packaging & Availability
- Country Availability
- Regional Availability
Storage & Handling
- Shelf Life
- 180 Days
- Storage and Handling
- At temperatures up to 25°C storage stability packed in original containers amounts to at least 180 days. It is important to protect BECKOPOX™ EP 2350w/60WA from frost; at low temperatures it has therefore to be stored under frostproof conditions.
- When handling and processing epoxy resins and hardeners, the rules and regulations established by local authorities should be observed. A Material Safety Data Sheet is available on request.