Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Distinguishing Features
BECKOPOX™ EP 2392w/70MP yields similar film properties to BECKOPOX™ EP 386w, slower hardness-development can be observed. The absence of water in form of delivery allows the use in zinc-rich primers as well as transport at low temperatures.
Applications & Uses
- Applications
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
- Coating Type
- Special Properties and Uses
- BECKOPOX™ EP 2392w/70MP is an internally flexibilized type 1-solid epoxy resin, diluted in methoxypropanol. This solution can be easily emulsified with water in a high-speed mixer to achieve a stable dispersion.
- BECKOPOX™ EP 2392w/70MP is used to formulate anticorrosive primers, singleor topcoats, due to its water-free form of delivery this product is very well suited for processing of water-sensitive pigments like zinc dust, such zinc-rich primers exhibit outstanding anticorrosive properties.
- Suitable hardeners are e. g. BECKOPOX™ EH 613w, VEH 2849w oder EH 623w.
- Suggested Uses and Processing Information
MIXING RATIO AND POTLIFE
A blend of 100.0g BECKOPOX™ EP 2392w/70MP, 20.3g BECKOPOX™ EH 613w/80WA, 20.3g deionized water has a potlife of approx. 3.5 hours at 25°C and 34% humidity. The end of potlife cannot be observed by viscosity increase or gelation so that is recommended to use the formulated lacquer within the stated time limit.
Properties
- Physical Form
- Emulsifiable in
- Water
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Flash Point (CCCFP) | approx. 32 | °C | — |
| Density (20°C) | approx. 1.08 | g/cm³ | — |
| Epoxy Equivalent (Form of Delivery) | 650 - 780 | g/mol | — |
| Dynamic Viscosity (25 s⁻¹, 23°C) | 1000 - 5000 | mPa.s | — |
| Non-Volatile Matter Analogue (1h, 160°C, 1g) | 68 - 72 | % | — |
Packaging & Availability
- Country Availability
- Regional Availability
Storage & Handling
- Shelf Life
- 1 Year
- Storage and Handling
- At temperatures up to 25°C storage stability packed in original containers amounts to at least 365 days.
- BECKOPOX™ EP 2392w/70MP can become turbid and structural viscous after storage at low temperatures. After warming up to 40°C normal viscosity and appearance is achieved again.
- When handling and processing epoxy resins and hardeners, the rules and regulations established by local authorities should be observed. A Material Safety Data Sheet is available on request.