Knowde Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Technologies
Features & Benefits
- Product Highlights
BENEFITS
- Good Salt-Spray Resistance
- Good flow and leveling properties
- Good recoat adhesion
- Low Free Formaldehyde
- Good flexibility properties
APPLICATION AREAS
- AED Coating
- General Metal Finishes
Applications & Uses
- Markets
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
Properties
- Physical Form
- Appearance
- Clear Liquid
- Insoluble in
- Water
- Typical Properties
- Solubility & Compatibility
SOLUBILITY
Alcohol Complete Esters Complete Ketones Complete Aromatic hydrocarbons Complete Aliphatic hydrocarbons Complete Water Insoluble COMPATIBILITY
Acrylic resins Very good Alkyd resins Very good Polyester resins Very good Epoxy resins Very good
Value | Units | Test Method / Conditions | |
Color | max. 1 | Gardner | — |
Non-Volatile Content | min. 97 | %wt | — |
Free Formaldehyde Content | max. 0.3 | % | — |
Viscosity (25°C) | X-Z1 | — | — |
Technical Details & Test Data
- Backbone Polymer Selection
CYMEL 285-100 resin is a versatile crosslinking agent for a wide range of polymeric materials containing carboxyl, hydroxyl or amide functionalities such as acrylic, alkyd, polyester and epoxy resins.
In water borne system
Due to its hydrophobic nature, CYMEL 285-100 resin has to be dissolved initially in the organic phase of the water reducible backbone polymer.
- Catalysis
CYMEL 285-100 is an efficient cross-linking agent for hydroxyl, carboxyl, amine or amide functional polymers. The cross-linking reaction follows the reaction pathway for specific acid catalysis and requires strong acid catalyst such as CYCAT 4040 catalyst, CYCAT 600 catalyst and CYCAT 500 catalyst. Usually 0.2% to 0.4% strong acid on binder solids is recommended for a 15-20 minute bake schedule at 120°C to 150°C
- Stability
FORMULATION STABILITY
In a formulated system, stability can be improved by the use of a blocked acid catalyst, or by the addition of a stabilizing alcohol to the formulation. Good stability has been obtained in high-solids systems by using 25% of the added solvent as primary alcohol and blocking the acid catalyst with 110% of the stoichiometric equivalent of an amine.
STORAGE STABILITY
CYMEL 285-100 resin has a shelf life of 18 months from the date of manufacture when stored at temperatures between 5°C and 30°C packed in unopened original containers .CYMEL 285-100 resin must be kept indoors and avoided the direct sunlight exposure. Although lower temperatures are not detrimental to stability, its viscosity will increase, possibly making the resin difficult to pump or pour. The viscosity will reduce again on warming, but care should be taken to avoid excessive local heat as this can cause an irreversible increase in viscosity.
Storage & Handling
- Shelf Life
- 18 months