Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
Features & Benefits
Applications & Uses
- Applications
- Cure Method
- Coating Type
- Ink & Toner Type
- Suggested Applications
- EBECRYL® 113 is recommended as a reactive diluent for:
- Screen inks and varnishes
- Coatings for paper and plastic
- Water resistant coatings
- Flexible coatings
- Coatings and inks with adhesion to plastics such as polyethylene andplasticized PVC
- Wood sealers and topcoats
Properties
- Physical Form
- Appearance
- Clear liquid
- Physical Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Flash Point (Setaflash) | min. 100 | °C | — |
| Density (25°C) | 0.97 | g/ml | — |
| Functionality (Theoretical) | 1 | — | — |
| Surface Tension | 31.9 | dyne/cm | — |
| Value | Units | Test Method / Conditions | |
| Acid Value | max. 1.0 | mgKOH/g | — |
| Acrylic Acid Content | max. 2000 | ppm | — |
| Color | max. 3.0 | Gardner | — |
| Epoxy Content | max. 0.1 | % | — |
| Viscosity (25°C) | 90-150 | cP/mPa·s | — |
Safety & Health
- Precaution
- Before using EBECRYL® 113, see the Safety Data Sheet (SDS) for information on the identified hazards of the material and the recommended personal protective equipment and procedures.
Packaging & Availability
- Country Availability
- Regional Availability
Storage & Handling
- Storage and Handling
- Care should be taken not to expose the product to high temperature condition direct sunlight, ignition sources, oxidizing agents, alkalis or acids. This might cause uncontrollable polymerization of the product with the generation of heat. Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Procedures that remove or displace oxygen from the material should be avoided. Do not store this material under an oxygen free atmosphere. Dry air is recommended to displace material removed from the container. Wash thoroughly after handling. Keep container tightly closed. Use with adequate ventilation. See the SDS for the recommended storage temperature range for EBECRYL 113. Please refer to the allnex Guide to Safety and Handling of Acrylate Oligomers and Monomers for additional information on the safe handling of acrylates.