Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Base Chemicals Functions
- CASE Ingredients Functions
- Technologies
Features & Benefits
- CASE Ingredients Features
- Performance Highlights
EBECRYL 1141 is characterized by:
- Low odor
- Light color
- Low irritancy
- Good cure response
UV/EB cured products based on EBECRYL 1141 are characterized by the following performance properties :
- Low residual odor
- Reduction of potential extractables
- Flexibility while retaining hardness
- High abrasion resistance
- Good chemical resistance
The actual properties of UV/EB cured products also depend on the selection of other formulation components such as oligomers, additives and photoinitiators.
Applications & Uses
- Applications
- Application Method
- Cure Method
- Coating Type
- Ink & Toner Type
- Use Level
- 10-30%
- Suggested Applications
EBECRYL 1141 is recommended for use in coatings and inks requiring low residual content and reduction of potential extractables when formulated with other purified products and additives. EBECRYL 1141 is a reactive diluent that is compatible with a wide range of acrylated resins used in UV/EB curing applications.
Effective levels of EBECRYL 1141 typically range from 10% to 30%, depending on the application. In lithographic inks and varnishes it is quite effective in adjusting viscosity while maintaining or improving cure response and physical properties.
The high functionality of EBECRYL 1141 provides increased crosslink density in UV/EB cured coatings and inks, which can help improve gloss, hardness, and durability.
Properties
- Physical Form
- Appearance
- Clear liquid
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Acid Value | max. 1 | mgKOH/g | — |
| Acrylic Acid Content | max. 200 | ppm | — |
| Color | max. 400 | Pt-Co | — |
| Flash Point (Setaflash) | min. 100 | °C | — |
| Density (25°C) | 1.1 | g/ml | — |
| Formula Weight | 466 | — | — |
| Functionality (Theoretical) | 4 | — | — |
| Hydroxyl Value | max. 30 | mgKOH/g | — |
| Residual Solvent | max. 10 | ppm | — |
| Viscosity (25°C) | 1200 | mPa.s | — |
Safety & Health
- Precautions
Before using EBECRYL 1141, see the Safety Data Sheet (SDS) for information on the identified hazards of the material and the recommended personal protective equipment and procedures.
Packaging & Availability
- Regional Availability
Storage & Handling
- Storage and Handling
Care should be taken not to expose the product to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or acids. This might cause uncontrollable polymerization of the product with the generation of heat. Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Procedures that remove or displace oxygen from the material should be avoided. Do not store this material under an oxygen free atmosphere. Dry air is recommended to displace material removed from the container. Wash thoroughly after handling. Keep container tightly closed. Use with adequate ventilation.
See the SDS for the recommended storage temperature range for EBECRYL 1141