Knowde Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Applications
- Application Method
- Cure Method
- Coating Type
- Ink & Toner Type
- Suggested Applications
Clear & Pigmented Coatings
Over Print Varnishes
Liquid inkso Flexographyo Lithographyo Inkjeto Gravure- Pressure sensitive adhesives.
Liquid inkso Flexographyo Lithographyo Inkjeto Gravure- Pressure sensitive adhesives.
Properties
- Physical Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Functionality | 2 | — | — |
Molecular Weight (Theoretical) | 328 | — | — |
Specific Gravity | 1.005 | g/cm³ | — |
Value | Units | Test Method / Conditions | |
Surface Tension | 31.5 | dyne/cm | — |
Hopler Viscosity (25°C) | 20 | mPa.s | — |
Safety & Health
- Precaution
- The following is the summary of the precautions to be taken whenhandling this product. Please refer to the Safety Data Sheet for further details.The toxicological properties of this material have not been fully determined. Products of this can be expected to cause sensitization orother allergic responses. Appropriate precautions should be taken toavoid eye and skin contact and to avoid inhalation of the aerosols orvapours. Consult the relevant Safety Data Sheet for appropriate handling procedures and protective equipment prior to using this or any other material referred to in this bulletin.See Safety Data Sheet for emergency and first aid procedures.
Packaging & Availability
- Country Availability
- Regional Availability
Storage & Handling
- Shelf Life
- 2 years
- Storage and Handling
- Care should be taken not to expose radiation curable products to temperatures exceeding 40°C for prolonged periods or direct sunlight. This might cause uncontrollable polymerisation of the product with generation of heat. Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Do not store this material in an oxygen free atmosphere. Use dry air to displace material removed from the container. This material should not be stored for morethan 2 years.