Knowde Enhanced TDS
Identification & Functionality
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Applications
- Application Method
- Cure Method
- Coating Type
- Suggested Applications
Formulated UV/EB curable products containing EBECRYL® 45 may be applied bylithographic, screen, gravure, direct or reverse roll, and curtain coating methods.
EBECRYL® 45 is recommended for use in:- Low migration offset and flexo inks
- Low migration overprint varnishes
- Coatings on paper & board and plastics
Properties
- Physical Form
- Appearance
- Clear liquid
- Typical Properties
Value | Units | Test Method / Conditions | |
Color | max. 2 | Gardner | — |
Density | 1.15 | g/ml | — |
Residual Acrylic Acid | max. 500 | ppm | — |
Residual Solvent | 100 | ppm | — |
Viscosity (25°C) | approx. 160 | cP/mPa·s | — |
Safety & Health
- Precaution
- Before using EBECRYL® 45, see the Safety Data Sheet (SDS) for information on the identified hazards of the material and the recommended personal protective equipment and procedures.
Packaging & Availability
- Regional Availability
Storage & Handling
- Storage and Handling
- Care should be taken not to expose the product to high temperature condition direct sunlight, ignition sources, oxidizing agents, alkalis or acids. This might cause uncontrollable polymerization of the product with the generation of heat. Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Procedures that remove or displace oxygen from the material should be avoided. Do not store this material under an oxygen free atmosphere. Dry air is recommended to displace material removed from the container. Wash thoroughly after handling. Keep container tightly closed. Use with adequate ventilation. See the SDS for the recommended storage temperature range for EBECRYL 45. Please refer to the allnex Guide to Safety and Handling of Acrylate Oligomers and Monomers for additional information on the safe handling of acrylates.