Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
Applications & Uses
- Applications
- Application Method
- Compatible Substrates & Surfaces
- Cure Method
- Coating Type
- Suggested Applications
Formulated UV/EB curable products containing EBECRYL® 525 may be applied by lithographic, screen, gravure, direct or reverse roll, and curtain coating methods.
EBECRYL® 525 is recommended for use in:- Screen ink vehicles with good intercoat adhesion
- Adherable primer coating on metals
- Laminating adhesives, particularly between paper/aluminum,paper/LDPE, paper/polypropylene, aluminum/LDPE.
Properties
- Physical Properties
- Typical Properties
- Cured Properties
| Value | Units | Test Method / Conditions | |
| Density | 1.21 | g/cm³ | — |
| Polymer Solids Content | 60 | % wt | — |
| TPGDA | 40 | % wt | — |
| Value | Units | Test Method / Conditions | |
| Acid Value | 25 | mgKOH/g | — |
| Color | max. 200 | — | APHA |
| Irritaion By OECD | 0 | — | — |
| Hopler Viscosity (25°C) | 40000 | mPa.s | — |
| Value | Units | Test Method / Conditions | |
| Tensile Elongation | 59 | % | — |
| Tensile Strength | 9 | MPa | — |
Safety & Health
- Precaution
- The following is a summary of the precautions to be taken when handling this product. Please refer to the Safety Data Sheet for further details.The toxicological properties of this material have not been fully determined. Products of this type can be expected to be eye and skin irritant and have the potential to cause sensitization or other allergic responses. Appropriate precautions should be taken to avoid eye and skin contact and to avoid inhalation of the aerosols or vapors. Consult the relevant Safety Data Sheet for appropriate handling procedures and protective equipment prior to using this or any other material referred to in this bulletin.See Safety Data Sheet for emergency and first aid procedures.
Packaging & Availability
- Country Availability
- Regional Availability
Storage & Handling
- Shelf Life
- 2 years
- Storage and Handling
- Care should be taken not to expose radiation curable products to temperatures exceeding 40°C for prolonged periods or to direct sunlight. This might cause uncontrollable polymerization of the product with generation of heat. Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Do not store this material under an oxygen free atmosphere. Use dry air to displace material removed from the container. This material should not be stored for more than 2 years.