EBECRYL® 571, formulated by CASE Ingredients, is a radiation-curable coating designed with a focus on environmental sustainability, evident from its bisphenol A-free composition and low carbon footprint (PCF). This clear liquid coating is ideal for industrial applications, including metal coatings and textile manufacturing within the paints and coatings and printing and packaging sectors. Its application versatility extends to methods like curtain coating, gravure coating, and roller techniques, adhering effectively to substrates such as metal and plastic.

Chemical Family: Polyester Acrylates, Polyesters

End Uses: Radiation Curable Coating

Compatible Substrates & Surfaces: Metal, Plastics

Glass Transition Temperature (Tg): 44.0 - 44.0 °C

Features: Faster Cycle Time, Long Potlife, Low Energy Consumption, Low Temperature-Curing

Technical Data Sheet
  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

CASE Ingredients Functions
Technologies

Features & Benefits

Applications & Uses

Compatible Substrates & Surfaces
Cure Method
Suggested Applications

UV/EB curable products containing EBECRYL® 571 may be applied by flexographic, screen, gravure, direct or reverse roll, and curtain coating methods.

EBECRYL®571 is recommended for:
  • Flexographic inks and coatings for shrink sleeve applications.

Properties

Physical Form
Appearance
Clear liquid
Physical Properties
ValueUnitsTest Method / Conditions
Acid Valuemax. 5mgKOH/g
Colormax. 2Gardner
Density (25°C)1.14g/ml
Surface Tension39dyne/cm
Refractive Index (25°C)1.5069
Viscosity (25°C)approx. 9000cP/mPa·s
Cured Properties
ValueUnitsTest Method / Conditions
Glass Transition Temperature44°C
Tensile Strength1160 (8.0)psi (MPa)
Young's Modulus80000 (552)psi (MPa)
Elongation at Break20%

Safety & Health

Precaution
Before using EBECRYL® 571, see the Safety Data Sheet (SDS) for information on the identified hazards of the material and the recommended personal protective equipment and procedures.

Packaging & Availability

Regional Availability
  • Africa
  • China
  • Europe
  • Latin America
  • Middle East
  • North America

Storage & Handling

Storage and Handling
Care should be taken not to expose the product to high temperature condition direct sunlight, ignition sources, oxidizing agents, alkalis or acids. This might cause uncontrollable polymerization of the product with the generation of heat. Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Procedures that remove or displace oxygen from the material should be avoided. Do not store this material under an oxygen free atmosphere. Dry air is recommended to displace material removed from the container. Wash thoroughly after handling. Keep container tightly closed. Use with adequate ventilation. See the SDS for the recommended storage temperature range for EBECRYL 571. Please refer to the allnex Guide to Safety and Handling of Acrylate Oligomers and Monomers for additional information on the safe handling of acrylates.