Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Applications
- Application Method
- Compatible Substrates & Surfaces
- Cure Method
- Coating Type
- Suggested Applications
Formulated UV/EB curable products containing EBECRYL® 6603 may be applied viadirect or reverse roll, offset gravure, metering rod, slot die, knife over roll, airknife, curtain, immersion and spin coating methods, as well as offset and screenprinting.
EBECRYL® 6603 is recommended for use in:- Screen ink vehicles
- Laminating adhesives
- Coatings for rigid and flexible plastics
- Metal decorating inks and coatings
Properties
- Physical Form
- Appearance
- Clear liquid
- Physical Properties
- Typical Properties
- Cured Properties
Value | Units | Test Method / Conditions | |
Functionality (Theoretical) | 1.4 | — | — |
Oligomer | 80 | % wt | — |
Density (25°C) | 1.07 | g/ml | — |
Viscosity (25°C) | approx. 188000 | cP/mPa·s | — |
Value | Units | Test Method / Conditions | |
Color | max. 1 | Gardner | — |
Viscosity (60°C) | 9000-19000 | cP/mPa·s | — |
Value | Units | Test Method / Conditions | |
Tensile Strength | 872 (6.0) | psi (MPa) | — |
Young's Modulus | 1623 (11.2) | psi (MPa) | — |
Elongation at Break | 129 | % | — |
Regulatory & Compliance
- Certifications & Compliance
- Quality Standards
Safety & Health
- Precaution
- Before using EBECRYL® 6603, see the Safety Data Sheet (SDS) for information on the identified hazards of the material and the recommended personal protectivequipment and procedures.
Packaging & Availability
- Regional Availability
Storage & Handling
- Storage and Handling
- Care should be taken not to expose the product to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or acids. This might cause uncontrollable polymerization of the product with the generation of heat. Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Procedures that remove or displace oxygen from the material should be avoided. Do not store this material under an oxygen free atmosphere. Dry air is recommended to displace material removed from the container. Wash thoroughly after handling. Keep container tightly closed. Use with adequate ventilation. See the SDS for the recommended storage temperature range for EBECRYL 6603. Please refer to the allnex Guide to Safety and Handling of Acrylate Oligomers and Monomers for additional information on the safe handling of acrylates.