EBECRYL® 7100

EBECRYL 7100 is characterized by:

• Low viscosity

• Light color

• Improved stability vs. conventional tertiary amines

• Excellent pigment wetting

UV/EB cured products based on EBECRYL 7100 are characterized by the following performance properties:

• Excellent UV cure response

• Reduced odor

• Improved moisture resistance

• No surface migration of amine

• High gloss

• Good adhesion to plastics (e.g. treated polyester, ABS, polycarbonate and polyphenylene oxide)

The final properties of UV/EB cured products also depend on the selection of the other formulation components, such as reactive diluents, additives and photoinitiators. SUGGESTED

Formulated UV/EB curable products containing EBECRYL 7100 may be applied
via direct or reverse roll, offset gravure, metering rod, slot die, knife over roll, air knife, curtain and immersion and spin coating methods, as well as screen printing. EBECRYL 7100 is recommended for:
• Coatings for paper and plastics
• Overprint varnishes
• Screen inks
• Wood topcoats

Products of this type can be expected to be eye and skin irritant and have the potential to cause sensitization or other allergic responses. Appropriate precautions should be taken to avoid eye and skin contact and to avoid inhalation of the aerosols or vapors.

Care should be taken not to expose the product to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or acids. This might cause uncontrollable polymerization of the product with the generation of heat. Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Procedures that remove or displace oxygen from the material should be avoided. Do not store this material under an oxygen free atmosphere. Dry air is recommended to displace material removed from the container. Wash thoroughly after handling. Keep container tightly closed. Use with adequate ventilation.