Knowde Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Performance Highlights
EBECRYL 7110 is characterized by:
• Low color
• Moderate viscosity
• Improved stability vs. conventional tertiary amines
• Excellent pigment wetting
UV/EB cured products based on EBECRYL 7110 are characterized by the following performance properties:
• Excellent UV cure response
• Reduced odor
• Improved moisture resistance
• No surface migration of amine
• High gloss
• Good adhesion to plastics (e.g. treated polyester, ABS, polycarbonate and
polyphenylene oxide)
The final properties of UV/EB cured products also depend on the selection of the other formulation components, such as reactive diluents, additives and photoinitiators.
Applications & Uses
- Applications
- Application Method
- Cure Method
- Coating Type
- Ink & Toner Type
- Suggested Applications
Formulated UV/EB curable products containing EBECRYL 7110 may be applied
via direct or reverse roll, offset gravure, metering rod, slot die, knife over roll, air knife, curtain and immersion and spin coating methods, as well as screen printing. EBECRYL 7110 is recommended for:
• Coatings for paper and plastics
• Overprint varnishes
• Screen inks
• Wood topcoats
Properties
- Physical Form
- Appearance
- Clear liquid
- Physical Properties
- Typical Properties
- Cured Properties
Value | Units | Test Method / Conditions | |
Density (25°C) | 1.1 | g/ml | — |
Weight/amine Theoretical | 404 | — | — |
Value | Units | Test Method / Conditions | |
Color | max. 0.3 | Gardner | — |
Viscosity (25°C) | 800-1500 | cP/mPa·s | — |
Value | Units | Test Method / Conditions | |
Elongation at Break | 23 | % | — |
Tensile Strength | 450 (3.1) | psi (MPa) | — |
Young's Modulus | 2600 (17.9) | psi (MPa) | — |
Packaging & Availability
- Regional Availability
Storage & Handling
- Storage and Handling
Care should be taken not to expose the product to high temperature conditions,
direct sunlight, ignition sources, oxidizing agents, alkalis or acids. This might cause uncontrollable polymerization of the product with the generation of heat. Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Procedures that remove or displace oxygen from the material should be avoided. Do not store this material under an oxygen free atmosphere. Dry air is recommended to displace material removed from the container. Wash thoroughly after handling. Keep container tightly closed. Use with adequate ventilation.