Company logo
product
EBECRYL® 8413
Search:

EBECRYL® 8413

EBECRYL® 8413 is designed as the pigment grind oligomer, for UV thermoformable ink applications, and should be used in conjunction with the letdown oligomer, EBECRYL® 1300. When used together with EBECRYL® 1300, non-blocking thermoformable inks can be developed. These thermoformable inks demonstrate scratch and temperature resistance, as well as excellent adhesion to a variety of plastic substrates without the necessity of corona discharge or flame pretreatment.
Product Resources

Knowde Enhanced TDS

Expand All

+

Identification & Functionality

+

Applications & Uses

+

Properties

+
Compatible Substrates & Surfaces
Physical Form
Physical Form
Liquid
Appearance
Hazy tan liquid
Physical Properties
ValueUnitsTest Method / Conditions
Density (at 25°C)1.04g/ml-
Flash Pointmin. 100°C-
Typical Properties
ValueUnitsTest Method / Conditions
Viscosity (at 60°C)21000-44000cP/mPa·s-
Cured Properties
ValueUnitsTest Method / Conditions
Elongation At Break550.0%-
Modulus1300 (9.0)psi (MPa)-
Stress2200 (15)psi (MPa)-
Toughness3700 (26)psi (MPa)-

Safety & Health

+
Precaution
Before using EBECRYL® 8413, see the Safety Data Sheet (SDS) for information on the identified hazards of the material and the recommended personal protective equipment and procedures.

Storage & Handling

+
Storage and Handling
Care should be taken not to expose the product to high temperature condition direct sunlight, ignition sources, oxidizing agents, alkalis or acids. This might cause uncontrollable polymerization of the product with the generation of heat. Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Procedures that remove or displace oxygen from the material should be avoided. Do not store this material under an oxygen free atmosphere. Dry air is recommended to displace material removed from the container. Wash thoroughly after handling. Keep container tightly closed. Use with adequate ventilation. See the SDS for the recommended storage temperature range for EBECRYL 841. Please refer to the allnex Guide to Safety and Handling of Acrylate Oligomers and Monomers for additional information on the safe handling of acrylates.

Most Viewed Documents

View 1 Document

Document Name
Type
Products
Learn More
EBECRYL® 8413 Technical Data Sheet - EN
Technical Data Sheet
EBECRYL® 8413
Technical Data Sheet
Products: EBECRYL® 8413
Product Page Index
a
b
c
d
e
f
g
h
i
l
o
p
r
s
t