Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Application Method
- Cure Method
- Coating Type
- Suggested Applications
Formulated UV/EB curable products containing EBECRYL® 8812 may be applied via direct or reverse roll, offset gravure, metering rod, slot die, knife over roll, air knife, curtain, immersion and spin coating methods, as well as screen printing.
EBECRYL® 8812 is recommended for use in:- In applications that must meet regulations for tin, heavy metal*, and quinonecontent
- Coatings for rigid and flexible plastics
- Floor tile coatings
- Laminating adhesives
- Screen ink vehicles and clear coatings
- Wood topcoats
- Metal decorating ink vehicles and clear coatings*As defined by C.O.N.E.G’s Toxic in Packaging Legislation, the ASTM Standard Consumer Safety Specification on Toy Safety F 963 (ASTM F 963-08), or the EU Directive 94/62/EC (andamendments) on packaging and packaging waste
Properties
- Physical Properties
Value | Units | Test Method / Conditions | |
Color (at Elevated Temperature) | max. 1 | Gardner | — |
Density (25°C) | 1.05 | g/ml | — |
EOEOEA | 10 | % wt | — |
Functionality (Theoretical) | 2.5 | — | — |
NCO Content | max. 0.2 | % | — |
Oligomer | 90 | % wt | — |
Viscosity (65.5°C) | approx. 10000 | cP/mPa·s | — |
Safety & Health
- Precaution
- Before using EBECRYL® 8812, see the Safety Data Sheet (SDS) for information on the identified hazards of the material and the recommended personal protective equipment and procedures.
Packaging & Availability
- Regional Availability
Storage & Handling
- Storage and Handling
- Care should be taken not to expose the product to high temperature condition direct sunlight, ignition sources, oxidizing agents, alkalis or acids. This might cause uncontrollable polymerization of the product with the generation of heat. Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Procedures that remove or displace oxygen from the material should be avoided. Do not store this material under an oxygen free atmosphere. Dry air is recommended to displace material removed from the container. Wash thoroughly after handling. Keep container tightly closed. Use with adequate ventilation.Upon storage, EBECRYL 8812 may show signs of crystallization. This crystallization can be removed by heating containers of EBECRYL 8812 to auniform temperature of 70°C. Ovens or hotboxes are recommended methodsheating. Heating tapes should not be used. In typical formulations, EBECRYL8812 does not exhibit signs of crystallization. See the SDS for the recommended storage temperature range for EBECRYL 881. Please refer to the allnex Guide to Safety and Handling of Acrylate Oligomers and Monomers for additional information on the safe handling of acrylates.