EBECRYL® LED 02

EBECRYL LED 02 has been developed for UV LED applications, but is equally suitable for UVA and other low energy curing applications. It can also provide better surface cure in typical, high energy curing applications that use standard medium pressure mercury lamps.

EBECRYL LED 02 is compatible with a broad range of selected resins of different chemical families, such as urethane acrylates, polyester acrylates, and epoxy acrylates. EBECRYL LED 02 is also compatible with acidic additives such as adhesion promoters.     

However, EBECRYL LED 02 is not compatible with all resins, and this should be
checked prior to use. Resins containing amines have a limited compatibility with
EBECRYL LED 02.                                                                                                             
Phosphine oxides such as TPO, and mono and bis acyl phosphine oxides, such as
MAPO and BAPO are recommended photoinitiator types for UV LED and UVA
curing.

Care should be taken not to expose the product to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or acids. This might cause uncontrollable polymerization of the product with the generation of heat. Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Procedures that remove or displace oxygen from the material should be avoided. Do not store this material under an oxygen free atmosphere. Dry air is recommended to displace material removed from the container. Wash thoroughly after handling. Keep container tightly closed. Use with adequate ventilation.