EBECRYL® LEO 10501

1 of 314 products in this brand
EBECRYL® LEO 10501 is a clear liquid radiation-curable coating designed for paints and coatings and the printing and packaging markets. With a bisphenol A-free composition and a low carbon footprint (PCF), it stands out as a solvent-free and voc-free solution. Tailored for packaging coatings, overprint varnishes, and printing applications like flexography, offset and lithographic printing, and screen printing, this product serves as a versatile radiation-curable coating and is compatible with flexography ink, lithographic ink, and offset ink.

End Uses: Flexography Ink, Lithographic Ink, Offset Ink, Radiation Curable Coating

Molecular Weight: 470.0 - 470.0 g/mol

Technical Data Sheet
  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

CASE Ingredients Functions
Technologies

Features & Benefits

Applications & Uses

Cure Method
Suggested Applications

EBECRYL® LEO 10501 is specially recommended to formulate low extractable and low odor UV/EB curable OPV’s and inks for flexography, lithography and screen applications.

It is also recommended as a viscosity reducer in applications that must meet regulations for tin, heavy metal*, and quinone content.(*As defined by C.O.N.E.G’s Toxic in Packaging Legislation, the ASTM Standard Consumer Safety Specification on Toy Safety F 963 (ASTM F 963-08), or theEuropean Standard on Safety of Toys EN 71-3:2013.)

Properties

Physical Form
Appearance
Clear liquid
Typical Properties
ValueUnitsTest Method / Conditions
Acrylic Acid Contentmax. 200ppm
Colormax. 150Pt-Co
Functionality (Theoretical)3
HQ/MEHQ Contentnd/6ppm
Density (25°C)1.1g/ml
Hydroxyl Valuemax. 5mgKOH/g
Molecular Weight470g/mol
Residual Solventmax. 100ppm
Viscosity (25°C)60-80cP/mPa·s

Safety & Health

Precaution
Before using EBECRYL® LEO 10501, see the Safety Data Sheet (SDS) forinformation on the identified hazards of the material and the recommendedpersonal protective equipment and procedures.

Packaging & Availability

Regional Availability
  • Africa
  • China
  • Europe
  • Latin America
  • Middle East
  • North America

Storage & Handling

Storage and Handling
Care should be taken not to expose the product to high temperature condition direct sunlight, ignition sources, oxidizing agents, alkalis or acids. This might cause uncontrollable polymerization of the product with the generation of heat. Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Procedures that remove or displace oxygen from the material should be avoided. Do not store this material under an oxygen free atmosphere. Dry air is recommended to displace material removed from the container. Wash thoroughly after handling. Keep container tightly closed. Use with adequate ventilation. See the SDS for the recommended storage temperature range for EBECRYL LEO10501. Please refer to the allnex Guide to Safety and Handling of Acrylate Oligomers and Monomers for additional information on the safe handling of acrylates.