Knowde Enhanced TDS
Applications & Uses
- Suggested Applications
- EBECRYL® LEO 10801 is recommended for use in:
- Lithographic and flexographic inks
- Offset OPV
- Inks and coatings for indirect food packaging and related applications.
Properties
- Appearance
- Clear dark liquid
- Typical Properties
Value | Units | Test Method / Conditions | |
Acid Value | max. 15 | mgKOH/g | — |
Density | 1.08 | g/ml | — |
Functionality (Theoretical) | 6 | — | — |
Molecular Weight (Theoretical) | 1500 | — | — |
Residual Acrylic Acid | max. 500 | ppm | — |
Residual Solvent | max. 10 | ppm | — |
Viscosity (25°C) | 45600-52400 | cP/mPa·s | — |
Safety & Health
- Precaution
- Before using EBECRYL® LEO 10801, see the Safety Data Sheet (SDS) for informatioon the identified hazards of the material and the recommended personalprotective equipment and procedures.
Storage & Handling
- Storage and Handling
- Care should be taken not to expose the product to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or acids. This might cause uncontrollable polymerization of the product with the generation of heat. Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Procedures that remove or displace oxygen from the material should be avoided. Do not store this material under an oxygen free atmosphere. Dry air is recommended to displace material removed from the container. Wash thoroughly after handling. Keep container tightly closed. Use with adequate ventilation. See the SDS for the recommended storage temperature range for EBECRYL LEO10801. Please refer to the allnex Guide to Safety and Handling of Acrylate Oligomers and Monomers for additional information on the safe handling of acrylates.