SETAQUA® PU F125 is a hard wearing SXL water-based aliphatic PUD for flooring applications, both timber and concrete with high taber abrasion performance.
Chemical Family: Polyurethanes (PU)
End Uses: 1K (1 component) Coating, Waterborne Coating
Compatible Substrates & Surfaces: Wood
Product Resources
Knowde Enhanced TDS
Identification & Functionality
Chemical Family
CASE Ingredients Functions
Technologies
Product Families
Applications & Uses
Markets
Coating Type
Recommended Uses & Known Applications
Uses
in single pack varnishes with outstanding abrasion resistance
Applications
- SETAQUA® PU F125 is especially suited to formulate low VOC water-white vanishes with an excellent balance of overall properties.
- SETAQUA® PU F125 has been developed to achieve outstanding abrasion resistance for use in single pack varnishes. Taber values are similar to outcomes seen for traditional solventbased 1K aromatic moisture cure urethanes. SETAQUA® PU F125 can be blended with acrylics when considered for cost performance balance and is recommended for both DIY and Contractor applied finishes as well as industrial wood finishes. SETAQUA® PU F125 is NMP and APEO free.
- Optimally formulated DIY and contractor applied varnishes based on SETAQUA® PU F125 dry and cure rapidly after application, so resulting in a short re-coat time allowing the application of multiple coats in a day. The cured varnish forms a tough, clear warm toned and durable film with excellent clarity offering superb resistance to water, diluted alkalis and acids, alcohol, most household cleaners and other organic solvents along with excellent BHMR. It is recommended for use on timber floors and wood furniture finishes and paneling.
Properties
Typical Properties
Value | Units | Test Method / Conditions | |
Solvent | Water | - | - |
Neutralising Agent | Triethylamine | - | - |
Viscosity | max. 200 | cPa.s | - |
Non-Volatile Content | 35 | % | - |
pH Value (25°C) | 8.5 | - | - |
Specific Gravity | 1.04 | - | - |
Technical Details & Test Data
Compatibility
The product can be blended with other aqueous binders, especially acrylic emulsions. However, compatibility should always be tested.
Storage & Handling
Shelf Life
12 Months
Storage and Handling
When stored in original sealed containers at temperatures not exceeding 30°C, the product will remain stable for 12 months.
General information: The product is sensitive to frost. Freezing will damage the product irreversibly. Prolonged storage and storage at higher temperatures may result in a decrease of viscosity and/or an increase of average particle size, possibly resulting in sedimentation or coagulation. Contamination with certain bacteria, fungi or algae may render the product unstable.
Most Viewed Documents
Document Name
Type
Products