Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Chemical Name
- CASE Ingredients Functions
- CAS No.
- 7778-18-9
- EC No.
- 231-900-3
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
- Performance Highlights
UCECOAT 7510 is characterized by:
- Low yellowing on cure
- Excellent cost/performance balance
- Excellent cold check resistance
UV/EB cured properties of coatings based on UCECOAT 7510 are characterized by the following performance properties:
- Excellent drying properties
- Nearly tack free after physical drying
- Outstanding hardness, high reactivity
- Good chemical and stain resistance
The actual properties of UV/EB cured products also depend on the selection of other formulation components such as reactive diluents, additives and photoinitiators.
Applications & Uses
- Markets
- Applications
- Compatible Substrates & Surfaces
- Cure Method
- Coating Type
Properties
- Physical Form
- Appearance
- White translucent liquid
- Physical Properties
- Cured Properties
| Value | Units | Test Method / Conditions | |
| Particle Size | max. 150 | nm | — |
| Solids Content | approx. 40 | wt% | — |
| Density (25°C) | approx. 1.1 | g/ml | — |
| pH Value | 6.5-8 | — | — |
| Viscosity (25°C) | max. 200 | cP/mPa·s | — |
| Value | Units | Test Method / Conditions | |
| Elongation at Break | 0.5 | % | — |
| Koenig hardness (on glass) | 175 | sec | — |
| Tensile Strength | 1030 (7.1) | psi (MPa) | — |
| Young's Modulus | 210305 (1450) | psi (MPa) | — |
Safety & Health
- Precautions
Before using UCECOAT 7510, see the Safety Data Sheet for information on the identified hazards of the material and the recommended personal protective equipment and procedures.
Packaging & Availability
- Country Availability
- Regional Availability
Storage & Handling
- Storage and Handling
- Protect the product from freezing. Care should be taken not to expose the product to high temperature conditions or direct sunlight. Containers should be kept closed and away from materials that react with water. Bacteriological contamination can occur if the product is stored for an extended period in a container which is not sufficiently sealed or clean. Storage and handling should be in stainless steel, amber glass, or amber polyethylene containers. After prolonged storage product can settle and may require agitation to re-disperse. This product is stable under normal conditions of handling and storage. Do not store this material under an oxygen free atmosphere. Wash thoroughly after handling. Use with adequate ventilation.
- See the SDS for the recommended storage temperature range for UCECOAT 7510.