Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
- Performance Highlights
UCECOAT 7674 is characterized by:
- Milky appearance
- Very low viscosity
- Tacky after water evaporation and before UV curing. Tacky material can be re-emulsified and reused after filtration
- Very good compatibility, easy formulation
UV/EB cured products based on UCECOAT 7674 are characterized by the following performance properties:
- Excellent adhesion on wood
- Excellent flexibility
- Outstanding wetting of wood surfaces
- High hardness
- Very low yellowing
The actual properties of UV/EB cured products also depend on the selection of other formulation components such as reactive diluents, additives, and photoinitiators.
Applications & Uses
- Applications
- Application Method
- Compatible Substrates & Surfaces
- Cure Method
- Recommended Uses & Known Applications
Formulated UV/EB curable products containing UCECOAT 7674 are typically applied by spray or curtain coating and by roller and T-bar in field applied applications. Additional methods may also be used.
UCECOAT 7674 is recommended for:
- Wood primers
- Clear and pigmented wood coatings
- Top coat for wood furniture and doors
- Field applied clear coatings on wood, concrete, VCT, and resilient flooring
Properties
- Appearance
- Emulsion
- Compatible with
- Water
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Non-Volatile Matter | 38.0-42.0 | % | — |
| Particle Size | max. 150 | nm | — |
| Density (25°C) | 1.05 | g/ml | — |
| pH Value | 6.4-7.8 | — | — |
| Viscosity (25°C) | max. 200 | cP | — |
Safety & Health
- Precautions
Before using UCECOAT 7674, see the Safety Data Sheet for information on the identified hazards of the material and the recommended personal protective equipment and procedures.
Packaging & Availability
- Country Availability
- Regional Availability
Storage & Handling
- Storage and Handling
- Protect the product from freezing. Care should be taken not to expose the product to high temperature conditions or direct sunlight. Containers should be kept closed and away from materials that react with water. Bacteriological contamination can occur if the product is stored for an extended period in a container which is not sufficiently sealed or clean. Storage and handling should be in stainless steel, amber glass, or amber polyethylene containers.
- After prolonged storage product can settle and may require agitation to re-disperse. This product is stable under normal conditions of handling and storage. Do not store this material under an oxygen free atmosphere. Wash thoroughly after handling. Use with adequate ventilation.
- See the SDS for the recommended storage temperature range for UCECOAT 7674.