Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
- Materials Features
- Performance Highlights
UCECOAT 7717 is characterized by:
- Translucent to milky emulsion
- 40 % solid content
- Low viscosity
- Not physically drying before UV curing and very low tack
- Tin-free and Xi-free
Radiation cured formulations based on UCECOAT 7717 are characterized by the following performance properties:
- Excellent adhesion properties & anfeuerung
- Excellent primer properties
- Good compatibility with stains (dyes and pigments)
- Non-yellowing
The actual properties of UV/EB cured products also depend on the selection of the other formulation components, such as reactive diluents, additives and photo initiators.
Applications & Uses
- Markets
- Applications
- Application Method
- Cure Method
- Coating Type
- Recommended Uses & Known Applications
Formulated UV/EB curable products containing UCECOAT 7717 are typically applied by spray and curtain coating and roll coating. Additional methods may also be used.
UCECOAT 7717 is recommended for use in:
- Wood coatings
- Protective coatings for plastics
Properties
- Appearance
- Emulsion
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Non-Volatile Matter | 38.5-41.5 | % | — |
| Density (25°C) | 1.1 | g/ml | — |
| Particle Size | max. 150 | nm | — |
| pH Value | 6.0-7.5 | — | — |
| Viscosity (25°C) | max. 250 | cP | — |
Safety & Health
- Precautions
Before using UCECOAT 7717, see the Safety Data Sheet for information on the identified hazards of the material and the recommended personal protective equipment and procedures
Packaging & Availability
- Country Availability
- Regional Availability
Storage & Handling
- Storage and Handling
- Protect the product from freezing. Care should be taken not to expose the product to high temperature conditions or direct sunlight. Containers should be kept closed and away from materials that react with water. Bacteriological contamination can occur if the product is stored for an extended period in a container which is not sufficiently sealed or clean. Storage and handling should be in stainless steel, amber glass, or amber polyethylene containers.
- After prolonged storage product can settle and may require agitation to re-disperse. This product is stable under normal conditions of handling and storage. Do not store this material under an oxygen free atmosphere. Wash thoroughly after handling. Use with adequate ventilation.
- See the SDS for the recommended storage temperature range for UCECOAT 7717. Please refer to the allnex Guide to Safety and Handling of Acrylate Oligomers