Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
- Performance Highlights
Ucecoat 7770 is characterized by :
- low viscosity
- monomer free composition
- tack free-properties after water evaporation (before UV-curing)
- hard grade
The actual properties of UV/EB cured products also depend on the selection of the other formulation components, such as reactive diluents, additives and photoinitiators.
Applications & Uses
- Applications
- Application Method
- Cure Method
- Coating Type
- Recommended Uses & Known Applications
Formulated UV/EB curable products containing Ucecoat 7770 may be applied by direct or reverse roll, spray and curtain coating methods.
Ucecoat 7770 is recommended for use in :
- waterbased UV wood coatings
- waterbased UV protective coatings for PVC flooring
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Brookfield Viscosity (at 25°C) | approx. 50 | mPa.s | — |
| pH Value | 7.5 | — | — |
| Solids Content | 35 | wt% | — |
Safety & Health
- Precautions
- The following is a summary of the precautions to be taken when handling this product. Please refer to the Safety Data Sheet for further details.
- The toxicological properties of this material have not been fully determined.
- Products of this type can be expected to be eye and skin irritant and have the potential to cause sensitization or other allergic responses. Appropriate precautions should be taken to avoid inhalation of the aerosols or vapors.
- Consult the relevant Safety Data Sheet for appropriate handling procedures and protective equipment prior to using this or any other material referred to in this bulletin.
Packaging & Availability
- Country Availability
- Regional Availability
Storage & Handling
- Storage and Handling
- Care should be taken not to expose radiation curable products to temperatures exceeding 60 °C for prolonged periods or to direct sunlight. This might cause uncontrollable polymerization of the product with generation of heat. Due to presence of water, Ucecoat 7770 needs to be stored above freezing temperatures.
- Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phonelic lined containers. Do not store this material under an oxygen free atmosphere. Use dry air to displace material removed from the container. This material should not be stored for more than 1 year.