Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
- Special Properties
- Uvekol S 15 has excellent impact resistance.
- The product has been optimized for the use in safety and security glazing. Here follows an overview of the performance of laminated glass produced with the Uvekol S 15 resin.
- Performance Characteristics
SAFETY PERFORMANCE
ANSI and variants – pendulum test
The most commonly used tests for safety performance are pendulum tests. In this approach, a soft body impactor (bag, tires) is swung from a standardized drop height against a vertically positioned test panel. The test simulates a person slipping and falling against a safety glass: a balustrade, banister or façade. The table below shows examples of laminate compositions meeting the respective standard.
STANDARD IMPACTOR TYPE WEIGHT - kg DROP HEIGHT mm IMPACT ENERGY Joule COMPOSITION * mm ANSI Z.97 BAG – 45 kg 1219 548 4 / 0.8 / 4 BS 6206 BAG – 45 kg 1219 548 3 / 0.8 / 3 4 / 0.8 / 4 5 / 0.8 / 5 * composition 4 / 1 / 5 means the laminate is built up 4 mm glass pane / 1mm Uvekol interlayer / 5mm glass pane
For detailed information on tests related to Security Performance and Accelerated Aging (Heat, Moisture & UV Resistance) please refer to the TDS.
Applications & Uses
- Markets
- Compatible Substrates & Surfaces
- Coating Type
- Application Procedure
- The lamination of glass with Uvekol resins is a simple application process, it requires no heating or pressure. The glass panes to be laminated are cleaned and joined together with a double-sided adhesive tape, leaving a small opening.
- Uvekol S 15 is pumped into the cavity between the panes and then the resin is cured in an UV oven for 20 minutes (standard time for most laminating applications).
Properties
- Physical Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Color | max. 50 | Apha | — |
Hardness After Cure (21°C) | 70 | Shore A | — |
Hopler Viscosity (25°C) | 75 | mPa.s | — |
Refractive Index (25°C) | 1.441 | — | — |
Shore A Hardness After Cure (at 21°C) | 70 | — | — |
Value | Units | Test Method / Conditions | |
Density | 0.998 | g/cm³ | — |
Packaging & Availability
- Regional Availability
- Packaging Information
Uvekol S 15 is available in plastic drum of 180 Kg net weight and containers schütz of 1000 Kg net weight.
Storage & Handling
- Shelf Life
- 9 Months
- Storage and Handling
- Uvekol should be stored in a dry place, away from sources of heat, at a temperature of 15 to 30°C.
- Uvekol resins have a shelf life of 9 months from the date of manufacture.
TRANSPORT REGULATION
Flash point UN ADR / RID IATA / IMCO Tpr LABEL WGK 8°C 2924 3(8), II 3(8), II 39+62 2