Company logo

Products

allnex
Automotive & Transportation
Applications
Coatings & Finishes
Transportation
Automotive
Bonding & Assembly
407 products found on allnex in Automotive & Transportation .
With TDS
Additol® Xl 255 N product card banner

allnex

ADDITOL® XL 255 N

Function: Dispersant, Wetting Agent

Additol® XL 255 N is an electroneutral wetting agent and dispersing agent for pigments. It reduces flocculation in the case of all common organic and inorganic pigments used in air drying and stoving paint systems.

Modaflow® 2100 product card banner

allnex

MODAFLOW® 2100

Function: Flow Promoter, Leveling Agent

Modaflow® 2100 is an acrylic flow modifier, without silicone addition. It improves flow and leveling, reduces pinholes, fish eyes, craters, and orange peels, improves substrate wetting, aids in air release, and facilitates pigment dispersion.

Additol® Vxl 4950 product card banner

allnex

ADDITOL® VXL 4950

Function: Coupling Agent, Adhesion Promoter

ADDITOL® VXL 4950 is an adhesion-promoting primer for plastics. It must be applied as pre-treatment primer and cannot be used as additive in paints.

Modaflow® 9200 product card banner

allnex

MODAFLOW® 9200

Function: Flow Promoter, Leveling Agent

Modaflow® 9200 is an acrylic flow modifier, without silicone addition. It improves flow and leveling, substrate wetting, or maintains high gloss and substrate and inter-coat adhesion, and facilitates pigment dispersion.

Modaflow® Resin product card banner

allnex

MODAFLOW® RESIN

Function: Flow Promoter, Leveling Agent

MODAFLOW® Resin is an acrylic flow modifier without silicone addition. It is used in non-aqueous industrial coatings and powder coatings to improve flow and leveling, reduce pinholes, fisheyes, craters, and orange peel; and to improve substrate wetting. This product also helps maintain or improve substrate adhesion, to defoam and aid in air release, and to facilitate pigment dispersion.

Cycat® 4045 Catalyst product card banner

allnex

CYCAT® 4045 Catalyst

Function: Catalyst

CYCAT® 4045 Catalyst is an amine blocked para-toluene sulfonic acid catalyst. It is recommended for accelerating the cure response of amino crosslinking resins while providing improved formulation package stability compared with the un-blocked para-toluene sulfonic acid CYCAT 4040 catalyst. It is especially recommended for use with highly alkylated amino crosslinking resins. This product provides excellent stability in high solids and waterborne systems, and in the latter it can be added without causing binder precipitation, which can often occur due to a drop in pH.

Setalux® 1385 Bx-51 product card banner

allnex

SETALUX® 1385 BX-51

Applications: Vehicle Refinish, Industrial Coatings, Other Specialty Coatings

Product Families: Acrylics, Resins & Binders

Chemical Family: Acrylics & Acrylates

End Uses: 2K (2 component) Coating, 1K (1 component) Coating, Solventless & High Solids Coating

SETALUX® 1385 BX-51 is a thermosetting hydroxylated acrylic copolymer. Good compatibility with cellulose aceto-butyrate resins.

Cymel® 303 Lf Resin product card banner

allnex

CYMEL® 303 LF Resin

Function: Crosslinking Agent

CYMEL® 303 LF resin is a highly methylated, monomeric melamine crosslinker supplied in liquid form. Its high extent of alkylation and low tendency to self-condense makes this product a highly effective crosslinking agent for a broad range of applications such as can, container, automotive and general industrial coatings. While CYMEL® 303 LF resin is insoluble in water, it shows excellent compatibility with water-soluble backbone polymers and provides very good stability in amine-stabilized waterborne formulations.

Cymel® 385 Resin product card banner

allnex

CYMEL® 385 Resin

Function: Crosslinking Agent

CYMEL® 385 resin is a methylated high imino melamine resin with a low degree of alkylation. Being supplied in water, it is recommended as a crosslinking agent for hydroxyl-containing emulsion polymers and other aqueous systems containing hydroxyl or amide functionality. It has a high tendency to self-condense and may be used to increase the hardness and resistance properties of thermoplastic waterborne polymers.

Alnovol® Uf 410 Rpc product card banner

allnex

ALNOVOL® UF 410 RPC

Function: Crosslinking Agent, Binder

ALNOVOL® UF 410 RPC is a carbamic resin on silica. It is compatible with most of the synthetic and natural rubbers. Due to the silica carrier in solvents, no clear solution is possible.

Resamin® Hf 480 product card banner

allnex

RESAMIN® HF 480

Function: Gloss Enhancer

Resamin® HF 480 is a slightly yellow, high viscous liquid with characteristic odor. This carbamic resin, based on butylurethane and formaldehyde, has the properties of a plasticizer as well as that of a soft resin. It contains no organic solvents. It is light-fast and heat resistant and stable against hydrolysis. Resamin® HF 480 is mainly used as a soft resin in nitrocellulose lacquers for the coating of wood and paper to improve flexibility, adhesion, gloss and outdoor durability.

Ebecryl® 168 product card banner

allnex

EBECRYL® 168

Function: Coupling Agent, Adhesion Promoter

EBECRYL® 168 is an acidic methacrylate adhesion promoter designed as an additive for ultraviolet (UV) and electron beam (EB) curable coatings on metal. It is recommended for use in: general metal coatings and primers, coatings for galvanized pipe and tube, coil coatings, solder resist formulations.

Ebecryl® 350 product card banner

allnex

EBECRYL® 350

Function: Wetting Agent, Leveling Agent, Slip Agent

EBECRYL® 350 is a silicone diacrylate that improves slip, substrate wetting, and coating flow and leveling when used as an additive in formulations cured by ultraviolet light (UV) or electron beam (EB). Cured films containing EBECRYL® 350 will exhibit a smooth, tack free surface, with good blocking resistance. Because of its acrylate functionality, the silicone cures into the polymeric backbone, thus eliminating the migration that free silicones often display in coatings. EBECRYL® 350 is recommended for use in: overprint varnishes, clear coatings on paper, plastics and metal, and release coatings.

Cymel® 325 Resin product card banner

allnex

CYMEL® 325 Resin

Function: Crosslinking Agent

CYMEL® 325 resin is a methylated high imino melamine crosslinker supplied in iso-butanol. It is highly reactive and has a high tendency towards self-condensation providing films with very good hardness, gloss, chemical resistance and outdoor durability. It is suitable for a wide range of solventborne or waterborne baking applications, such as coil and can coating formulations, automotive primers and topcoats, and general industrial coatings.

Setalux® 1184 Ss-51 product card banner

allnex

SETALUX® 1184 SS-51

Applications: Marine, Vehicle Refinish, Other Packaging Coatings

Product Families: Acrylics, Resins & Binders

Chemical Family: Acrylics & Acrylates, Acrylic Polyols

End Uses: 2K (2 component) Coating, 1K (1 component) Coating, Solventless & High Solids Coating

SETALUX® 1184 SS-51 is an acrylic polyol with 2.0 % OH (calculated on non-volatiles). Excellent fast drying, very good through hardening, good stackability, long potlife, good chemical resistance, excellent mar and stain resistance, good light fastness, good compatibility with poly-isocyanates.

Ebecryl® 8402 product card banner

allnex

EBECRYL® 8402

Glass Transition Temperature (Tg): 14.0 - 14.0 °C

EBECRYL® 8402 is a low viscosity aliphatic urethane diacrylate. Films cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, toughness and excellent exterior durability. Low viscosity coatings or enhanced performance via increased oligomer content are possible. It is recommended for use in: coatings for wood, coatings for plastics, flexographic inks, screen inks, and exterior durable coatings.

Synthacryl® 700 product card banner

allnex

SYNTHACRYL® 700

Function: Curing Agent, Flattener

SYNTHACRYL® 700 is a glycidyl functionalized polyacrylic resin designed as a matting hardener for carboxylated polyester resins. Coatings based on carboxylic polyesters such as CRYLCOAT® 2441-2 cured with SYNTHACRYL® 700 produce outstandingly smooth, dead matte finishes.

Additol® Vxw 6208 product card banner

allnex

ADDITOL® VXW 6208

Function: Dispersant

ADDITOL® VXW 6208 is a polymer non-ionic dispersing additive for grinding inorganic and organic pigments in water or in waterborne alkyd resin, acrylic, epoxy, and urethane emulsions.

Daotan® Tw 6450/30wa product card banner

allnex

DAOTAN® TW 6450/30WA

Applications: Other Specialty Coatings, Food & Beverage Packaging, Wallcoverings & Decorative Laminates

Product Families: Polyurethanes (PU), Other Resins & Binders, Resins & Binders

Chemical Family: Polyurethanes (PU), Polycarbonate (PC)

End Uses: Waterborne Coating

DAOTAN® TW 6450/30WA is a polycarbonate based aqueous aliphatic polyurethane dispersion. It is recommended as the NMP / NEP- free alternative for Daotan™ (V)TW 1236. When dried at ambient temperatures, it creates clear, crack- free films without further addition of organic solvents or additives. These films exhibit excellent elasticity and mechanical properties as well as very good adhesion to different plastic substrates

Cycat® 6925 product card banner

allnex

CYCAT® 6925

Function: Catalyst

CYCAT 6925 catalyst is amine-neutralized dodecylbenzene sulfonic acid. It is compliant with FDA 21 CFR Section 175.300 concerning chemicals for use in resinous and polymeric coatings.

Cymel® 1170 Resin product card banner

allnex

CYMEL® 1170 Resin

Function: Crosslinking Agent

CYMEL® 1170 resin is a highly butylated glycoluril crosslinker designed for use in both water and organo-soluble coating systems. Its superior adhesion relative to existing melamine and benzoguanamine crosslinkers provides increased corrosion resistance and flexibility. The better adhesion is not lost after post-forming of parts and exposure of the stressed coating to humidity, steam, dry heat, or weather. This feature makes this product a good candidate for coil of metal decoration enamels and primers. In addition, it releases significantly lower amounts of formaldehyde during the baking process compared to other amino resins.

Setalux® 1152 Ss-60 product card banner

allnex

SETALUX® 1152 SS-60

Applications: Vehicle Refinish, Marine Coatings, Marine

Product Families: Acrylics, Resins & Binders

Chemical Family: Acrylics & Acrylates, Acrylic Polyols

End Uses: 2K (2 component) Coating, 1K (1 component) Coating, Solventless & High Solids Coating

SETALUX® 1152 SS-60 is an acrylic polyol with 4.2 % OH (calculated on non-volatiles). SETALUX® 1152 SS-60 is easy in application, even under conditions of high humidity and low temperatures. SETALUX® 1152 SS-60 is capable of high build with practically no yellowing under UV light, has excellent exterior durability, good mechanical properties and chemical resistance.

Setaqua® 37-6517 product card banner

allnex

SETAQUA® 37-6517

Applications: Marine, Marine Coatings, Decorative Paints, Coatings & Stains

Product Families: Acrylics, Resins & Binders

Chemical Family: Acrylics & Acrylates, Acrylic Polyols

End Uses: Waterborne Coating, Top Coat, Clearcoat

SETAQUA® 37-6517 (formerly SETAQUA® 6517) is an acrylic polyol emulsion suitable for high durable, abrasion- and chemical resistant two-component waterborne PUR paint systems.

Setaqua® B E 270 product card banner

allnex

SETAQUA® B E 270

Applications: Automotive OEM Coatings, Coatings & Finishes, Automotive & Transportation

Product Families: Polyesters, Resins & Binders

Chemical Family: Polyesters

End Uses: Waterborne Coating, Top Coat, Primer

SETAQUA® B E 270 is water thinkable, oil-free, polyester resin. In combination with water-thinkable amino resins in the formulation of industrial stoving coatings and aqueous stoving primer surfacers for online automotive finishing, both with low co-solvent content.

Setalux® D A 450 Ba/x product card banner

allnex

SETALUX® D A 450 BA/X

Applications: Marine, Vehicle Refinish, Marine Coatings

Product Families: Acrylics, Resins & Binders

Chemical Family: Acrylics & Acrylates, Acrylic Polyols

End Uses: 1K (1 component) Coating, Top Coat, Solventless & High Solids Coating

SETALUX D A 450 BA/X is a hydroxyl-functional acrylic polyol that is used in the formulation of very fast-drying two component polyurethane coating systems. When SETALUX D A 450 BA/X is used with aliphatic/aromatic polyisocyanates based on toluene diisocyanate and hexamethylene diisocyanate, two-component filler coats and topcoats for wood are possible that can be sanded very early and stacked after a short time.

Additol® Led 01 product card banner

allnex

ADDITOL® LED 01

Function: Light Stabilizer, Binder

ADDITOL® LED 01 is a mercapto modified polyester acrylate resin. It is added as co-resin to UV curable formulations, in order to transform them into UV LED curable systems. It is used as co-resin, in order to increase the surface cure of a formulation when cured with an UV LED lamp.

Allnex Dpgda product card banner

allnex

allnex DPGDA

CAS Number: 57472-68-1

Synonyms: 2-Propenoic acid oxybis(methyl-2,1-ethanediyl)ester, Dipropylene Glycol Diacrylate

DPGDA (Dipropylene Glycol Diacrylate) is a difunctional reactive diluent that polymerizes when exposed to sources of free radicals. DPGDA is particularly useful in coatings and inks where improved flexibility and adhesion are desired in combination with good moisture resistance.

Additol® Vxw 6393 product card banner

allnex

ADDITOL® VXW 6393

Applications: Marine, Marine Coatings, Decorative Paints, Coatings & Stains

Product Families: Foam Control, Additives

ADDITOL® VXW 6393 is a defoamer based on mineral spirits to prevent foam, without silicone addition. It was designed to destroy foam generated in emulsion wall-paints, based on PVAC, PVC, acrylics and their mixed polymers.

Additol® Xl 6577 product card banner

allnex

ADDITOL® XL 6577

Function: Dispersant, Wetting Agent, Anti-Flocculation Agent

ADDITOL® XL 6577 is a low molecular weight additive, which is especially able to deflocculate and stabilize inorganic pigments very actively by electrical charging at the pigment surface and permits very low viscosity millbase formulations. It can be used as a wetting and dispersing agent for solvent-containing systems.

Ebecryl® 7100 product card banner

allnex

EBECRYL® 7100

Function: Rheology Modifier, Photoinitiator, Thinner, Amine Synergist

EBECRYL® 7100 is an acrylate functional oligomeric amine resin generally used as an additive or diluent for more viscous oligomers. When used in formulations with a photoabstraction type photoinitiator (e.g. Benzophenone), EBECRYL 7100 has an accelerating effect on the UV cure speed. EBECRYL 7100 also promotes adhesion to plastic substrates such as polyester, ABS, polycarbonate and polypropylene oxide. It is recommended for use in: adhesives and coatings for plastics, clear coatings for paper, screen ink vehicles, metal decorating inks and coatings, wood fillers and coatings, lowering viscosities of other resin systems, and accelerating UV cure response.

Setalux® 1753 Ss-70 product card banner

allnex

SETALUX® 1753 SS-70

Applications: Marine, Vehicle Refinish, Marine Coatings

Product Families: Acrylics, Resins & Binders

Chemical Family: Acrylics & Acrylates, Acrylic Polyols

End Uses: 2K (2 component) Coating, 1K (1 component) Coating, Top Coat

SETALUX® 1753 SS-70 is an acrylic polyol with 4.2 % OH (calculated on non-volatiles). Fast drying, high build and gloss, excellent mechanical properties and chemical resistance, practically no yellowing under UV-light, high solids content at application viscosity.

Additol® Vxw 6210 N product card banner

allnex

ADDITOL® VXW 6210 N

Applications: Marine, Vehicle Refinish, Other Packaging Coatings

Product Families: Foam Control, Additives

End Uses: Waterborne Coating, Epoxy Coating, 2K (2 component) Coating

ADDITOL® VXW 6210 N is a silicone modified defoamer for emulsion paints, alkyd resin emulsion paints, and waterborne two-component EP paints. It is a highly effective dfoamer that is easily emulsive in water with good incorporating ability into all waterborne paint systems. This product is recommended for mainly low and medium-viscosity paints, such as gloss and silky gloss emulsions paints, and coatings for parquet floors and furniture on the basis of acrylate and acrylate/polyurethane emulsions.

Additol® Cpk product card banner

allnex

ADDITOL® CPK

Function: Photoinitiator

ADDITOL® CPK (a.k.a. Photo-initiator 184) is a radical photoinitiator that can be used alone or in combination with other photoinitiators. It is used in formulations containing unsaturated materials such as acrylates, methacrylates, vinyls and unsaturated polyesters. With exposure to UV light, ADDITOL® CPK undergoes a photochemical reaction that generates radicals. These radicals will initiate polymerization through the unsaturated groups present in the system. Suggested applications for ADDITOL® CPK include: paper upgrading, wood top-coats, hard-coats for plastics, overprint varnishes, vinyl flooring, metal coatings, exterior applications, general coating applications where low yellowing is critical, and inks and pigmented coatings (in combination with other photoinitiators). CAS Number: 947-19-3

Cymel® 327-70 product card banner

allnex

CYMEL® 327-70

Function: Crosslinking Agent

CYMEL® 327-70 resin is the diluted resin of CYMEL® 327 resin by butyl cellosolve to 70% solid. The resin chemical structure of CYMEL® 327-70 resin is completely same to CYMEL® 327 resin. CYMEL® 327-70 resin is a methylated high imino melamine crosslinker supplied in iso-butanol. CYMEL® 327-70 resin is very reactive and has a tendency towards self-condensation at normal baking temperatures, providing films with very good hardness, gloss, chemical resistance and outdoor durability. Its major advantage relative to other high imino resins is its potential to lower VOC in high solids formulations.

Setaqua® 6004 Ya product card banner

allnex

SETAQUA® 6004 YA

Applications: Vehicle Refinish, Decorative Paints, Coatings & Stains, Industrial Coatings

Product Families: Alkyds, Resins & Binders

Chemical Family: Alkyds (Short Oil)

End Uses: Waterborne Coating, Top Coat, Primer

SETAQUA® 6004 YA is an urethane modified, co-solvent free short oil alkyd resin emulsion (32% oil)

Additol® Xl 180 product card banner

allnex

ADDITOL® XL 180

Function: Coupling Agent, Adhesion Promoter

Additol® XL 180 enhances intercoat adhesion of stoving paints and fast drying air-drying paints on electrodeposition primers, white electrodeposition paints and primers.