Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
- Product Families
- Composition
- Active Substances: Blend of different quaternary ammonium compounds - Approx. 21.7%
- Inerts: Water, surfactant, formulation aids - Approx. 78.3%
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Key Benefits
- Cross-regional regulatory compatability
- Extensive claim set
- Hard Water Tolerance: 200ppm
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
- Application Areas
- Hotels
- Restaurants
- Catering establishments
- Schools
- Correctional facilities/prisons
- Cruise ships
- Applications
- Primary Applications:
- Institutional Janitorial
- Secondary Applications:
- Professional Services
- Consumer Household
- Primary Applications:
Properties
- Physical Form
- Appearance
- Liquid
- Odor
- Slightly aromatic
- Typical Physical Properties
- Physical Properties
| Value | Units | Test Method / Conditions | |
| Density (20°C) | 1.01 | g/cm³ | — |
| Viscosity (20°C) | 30 | mPa.s | — |
| Value | Units | Test Method / Conditions | |
| pH Value | 12.0 - 13.5 | — | — |
Regulatory & Compliance
- Certifications & Compliance
- European Regulatory Status
Arxada intends to authorize this product for Product Types 2 and 4 (PT2 and PT4), under the BPR as part of a Biocidal Product Family. The submission date is dependent on the timelines for the relevant Active Substance/Product Type combinations under the BPR Review program.
Under the Transitional Arrangements of the BPR, the registration footprint of this product will increase as new registrations are approved. Contact Arxada for details of the latest registration position.
- EU Efficacy Claims
The European Chemicals Agency (ECHA) publishes efficacy guidance which identifies the data requirements to substantiate product claims. Appendix 4 of the guidance document, provides a tabulated overview of the organisms, EN test methods, contact time, temperature, soiling condition and pass criteria for many uses with the disinfectant Product Types (PT1 − PT5).
The guidance is applicable for both full BPR Product Authorisation, and where Member States maintain National Schemes under the Transitional Arrangements (Article 89 of the BPR). The National Schemes remain in force while one or more Active Substance/Product Type combination relevant to the product, remain under evaluation as part of the BPR Active Substance Review Program.
Industrial & Institutional (I&I) and Food & Beverage (F&B) Conditions aligned with PT2 and PT4, without pre-cleaning (dirty, 3.0 g/l bovine albumin)
Claim Relevant EN Norms Contact Time Use Concentration* Representative Organism(s) Bactericidal EN 1276, EN 13697 1 min 2% E. coli ATCC 10536,
S. aureus ATCC 6538,
E. hirae ATCC 10541,
P. aeruginosa ATCC 15442Bactericidal N 1276, EN 13697 5 min 0.50% E. coli ATCC 10536,
S. aureus ATCC 6538,
E. hirae ATCC 10541,
P. aeruginosa ATCC 15442Bactericidal EN 13697 10 min 0.4%** E. coli ATCC 10536,
S. aureus ATCC 6538
E. hirae ATCC 10541,
P. aeruginosa ATCC 15442Yeasticidal EN 1650, EN 13697 5 min 0.50% C. albicans ATCC 10231 Virucidal against
Enveloped VirusesEN 14476
EN 167775 min
5 min0.5%
2%Modified Vaccinia Ankara (MVA)
Limited Virucidal
EN 14476
EN 1677730 min
30 min3%
5%Adenovirus type 5 strain adenoid 75
and Murine Norovirus (MNV)Note:
- * Not all claims are valid in all registered Member States
- ** Use concentration (0.4% or 1:256) and contact time (10 mins) aligns with the US UPA Label Efficacy Claims for bacteria
Packaging & Availability
- Regional Availability
Storage & Handling
- Shelf Life
- 2 years