Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Technologies
- Product Families
- Composition
Proprietary synergistic blend of organic fatty acids, esters, alkanes and alkanols.
Features & Benefits
- Materials Features
Applications & Uses
- Markets
- Compatible Polymers & Resins
- Plastics & Elastomers Processing Methods
- Use Level
- 1 to 10 Parts Per 1000 Resin
- Recommended Uses
- Epoxy: Aliphatic amine cured high temp(350⁰F)
- Phenolic, Vinyl ester
- Pultrusion
- Compression
- Application Method
General :
For best results, laboratory tests or pre-production trials should determine the optimum addition level. Mold Wiz Process Aid additives are effective within a range of 1 to 10 parts per 1000 resin or rubber by weight, excluding reinforcements, pigments and fillers. High amount of filler may require a higher percentage of Process Aid additives than the indicated maximum. Always start an evaluation at 5 parts per 1000 (0.5%). Too much internal may retard the cure. Reduce the level of internal or slightly increase the catalyst.
Mixing:
Mix into resin prior to addition of catalyst, fillers, and other resin additives.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Effective Ingredients | 100.0 | % | - |
| Flash Point | 415 / 212 | °F/°C | - |
| pH (10% in water) | 1.0 – 3.0 | - | - |
| Refractive Index | 1.455 – 1.475 | - | - |
| Solids | 100.0 | % | - |
| Specific Gravity (25°C) | 1.02 | - | - |
| Viscosity at 25°C | 250 – 450 | cPs | - |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability