Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Technologies
- Product Families
- Composition
Proprietary synergistic blend of organic fatty amides modified with surfactant.
Features & Benefits
- Materials Features
Applications & Uses
- Markets
- Compatible Polymers & Resins
- Use Level
- 1 to 10 Parts Per 1000 Resin
- Recommended Uses
Polycarbonate-Clear, Polycarbonate Blends, Glass-filled & pigmented grades, High Impact Polystyrene, Acetal, PSU, PPS Each component in this formulation has been certified by our raw material suppliers as having direct USFDA approval for food contact.
- Application Method
General:
For best results, laboratory tests or pre-production trials should determine the optimum addition level. MoldWiz Process Aid additive are effective within a range of 1 to 10 parts per 1000 resin excluding reinforcements, pigments and fillers. A high amount of filler may require a higher percentage of process aid additive than the indicated maximum. Always start an evaluation at 5 parts per 1000 (0.5%). The additive may increase the MFI. Reduce the level of additive or reduce the process temperature to raise the resin viscosity and to eliminate screw slippage.
Mixing:
Dry blend the process aid additive by tumbling or use an additive dispenser to meter directly into the resin stream. Process Aid Additive may be compounded into the resin to make a master-batch.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Dropping Point | 293 / 145 | °F / °C | - |
| Effective Ingredients | 100.0 | % | - |
| Flash Point | Non-Flammable | °F/°C | - |
| Solids | 100.0 | % | - |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability