Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Technologies
- Product Families
- Composition
Proprietary resin emulsion of polyolefins and organic fatty acids in combination with wetting agents and surfactant in a water vehicle.
Features & Benefits
- Materials Features
Applications & Uses
- Markets
- Applications
- Compatible Polymers & Resins
- Plastics & Elastomers Processing Methods
- Recommended Uses
- Polyester, Epoxy, Acrylic, Methyl methacrylate, Phenolic, Rubber.
- Winding, Hot press molding & Preforms for all molding surfaces
- Application Method
Clean mold with CleanWiz. Apply mold release with a clean cotton cloth wiping in two directions, using a circular motion. Allow to dry for five minutes. Spray a thin coat (fine mist to dry film) and allow to dry completely with no moisture residue. Accelerate drying time by blowing hot air or by using heat lamps. Repeat whenever mold has been cleaned with CleanWiz or as required to give mold release properties.
Properties
- Physical Form
- Typical Properties
Value | Units | Test Method / Conditions | |
Flash Point | Non-Flammable | °F/°C | - |
pH | 8.7 – 10.7 | - | - |
Solids | 10.0 | % | - |
Specific Gravity (25°C) | 0.99 | - | - |
Viscosity at 25°C | max. 50 | cPs | - |
Regulatory & Compliance
- Certifications & Compliance