Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Technologies
- Product Families
- Composition
Proprietary emulsion of hydrocarbons and ester wax, organic fatty acids with siloxane base polymer in combination with wetting agents and surfactant in a water vehicle.
Applications & Uses
- Applications
- Compatible Polymers & Resins
- Recommended Uses
- Natural and Synthetic Rubber
- Polyurethane
- Elastomer
- Application Method
Clean mold with CleanWiz. For optimum results, apply mold release in a thin coat by spray wherever possible. Allow to dry for five minutes. Spray a thin coat (fine mist to dry film). Accelerate drying time by blowing hot air or by using heat lamps. Repeat whenever mold has been cleaned with CleanWiz or as required to give mold release properties.
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Flash Point | Non-Flammable | °F/°C | - |
pH | 9 - 11 | — | — |
Solids | 4.5 – 5.5 | % | - |
Specific Gravity (25°C) | 0.994 | - | - |
Viscosity at 25°C | max. 50 | cPs | - |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability