Products

Lightweight, cost competitive and ballistically superior, Barrday’s thermoplastic resin based products can be molded into complex 3D shapes and reshaped using high temperatures. Their excellent ballistics properties make thermoplastics ideal for a wide range of applications including stab resistant materials and composite armors. Ballistic panels made using these resins can be used as either as stand-alone structures or in combination with steel or ceramic in personal or vehicle armor.

TU100 is a polyphenylene sulfide (PPS) fiber-reinforced uni-directional tape that processes in the 600-650oF (315-345oC) temperature range. The prepreg is used in a variety of high performance, structural composite applications. PPS is a high temperature semi-crystalline polymer with a good combination of toughness, chemical and solvent resistance, low moisture absorption and superior FST properties. Quality Certifications - Barrday Composite Solutions is AS9100 and ISO9001 certified.

TU300 is a polyetherketoneketone (PEKK) fiber-reinforced uni-directional tape that processes in the 675-725oF (360-385oC) temperature range. The prepreg is used in a variety of high performance, structural composite applications. PEKK is a high temperature semi-crystalline polymer with a good combination of toughness, chemical and solvent resistance, low moisture absorption and superior FST properties.

Phenolic resins are renowned for their excellent high temperature resistance, flame resistance, low smoke generation and low toxicity in fire situations. Phenolics are used in vehicle armor applications that utilize these properties in combination with E-glass and other high performance glass fibers. Phenolics are very rigid, although toughened versions are available with reduced temperature resistance.

Epoxy resins are a family of thermosets that offer a broad variety of performance characteristics. Epoxies are well known for their strength, toughness and their ability to be formulated to cure under a wide variety of time and temperature conditions. Epoxy prepregs are structural materials that are used in a wide variety of applications in the composites industry. In protective applications they can provide structural support to strengthen and stiffen soft armor structures as well as to reinforce ceramic plates to provide multi-hit resistance to armor piercing rounds.

U561 is an advanced para-aramid unidirectional material for hard armorballistic applications. U561 consists of two plies of unidirectionalproduct, cross-plied in 0°/90° confguration. Each layer is individually con-structed within a resin matrix using Barrday's proprietary UD technologyto align the fibers in a parallel direction. Material performance is dependent on product orientation. Always ensure the fiber orientation is correct.

BarrFlexTM U590t is an advanced para-aramid unidirectional material for softarmor ballistic applications. BarrFlexTM U590 consists of four plies of unidirectional product, cross-plied in 0°/90°/0°/90° configuration. Our proprietary UD technology aligns the fibers in each layer in a parallel direction. Each layer is individually constructed within a resin matrix. Thermoplastic film is laminated to the top and bottom surfaces for abrasion resistance.

LC296 is a snap curing phenolic prepreg system tailored for press molding in a variety of aircraft interior applications. LC296 provides extremely low OSU heat release combined with low smoke, self extinguishing, and excellent self adhesive properties and surface finish. LC296 is suitable for crushed core as well as flat honeycomb sandwich panel molding. Quality Certifications - Barrday Composite Solutions is ISO9001 and AS9100 certified.

Low fired stretch broken and spun carbon. Improved erosion resistance for solid rocket motors. Rayon replacement

EPH301H is a high Tg, highly toughened, controlled flow epoxy prepreg system that can cure in as low as 5 minutes in-hot, out-hot via compression molding process or even shorter with post cure, and is designed for high volume, structural applications in automotive and other industrial markets. Quality Certifications - Barrday Composite Solutions is ISO9001 and AS9100 certified.

Toughened, low heat release epoxy prepreg system (Sub 35/35 OSU). Self-adhesive to honeycomb. Excellent surface finish. EPM503-1 is offered as a press grade system. EPM505 is designed for bag molding.

TU400 is a polyetherimide (PEI) fiber-reinforced uni-directional tape that processes is in the 660-710oF (350-375oC)temperature range. The prepreg is used in a variety of high performance, structural composite applications. PEI is an amorphous polymer that provides high temperature resistance, toughness and superior FST properties.

BarrFlexTM U600 is an advanced para-aramid unidirectional material for softarmor ballistic applications. Barrday BarrFlexTM U600 consists of four plies of unidirectional product, cross-plied in 0°/90°/0°/90° configuration. Our proprietary UD technology aligns the fibers in each layer in a parallel direction. Each layer is individually constructed within a resin matrix. Thermoplastic film is laminated to the top and botom surfaces for abrasion resistance. Material performance is dependent on product orientation. Always ensure the fiber orientation is correct

EPM502 is a 250⁰F (121oC) curing toughened epoxy prepreg system that is designed for structural applications in aircraft interiors and other markets. This system is self-extinguishing and easily meets the requirements for both the 12 second and 60 second Vertical Ignition Tests listed in FAR 25-853. Quality Certifications - Barrday Composite Solutions is ISO9001 and AS9100 certified

TF300 is a polyetherketoneketone (PEKK) fabric semi-preg that processes in the 670-700oF (355-370oC) temperature range. The materials are used in a variety of high performance, structural composite applications. PEKK is a high temperature semi-crystalline polymer with a good combination of toughness, chemical and solvent resistance, low moisture absorption and superior FST properties.

BarrFlexTM U531 is an advanced para-aramid unidirectional material for hard armor ballistic applications. Barrday BarrFlexTM U531 consists of four plies of unidirectional product, cross-plied in 0°/90°/0°/90° configuration. Our proprietary UD technology aligns the fibers in each layer in a parallel direction. Each layer is individually constructed within a resin matrix. Material performance is dependent on product orientation. Always ensure the fiber orientation is correct.

Low fired stretch broken and spun carbon. Improved erosion resistance for solid rocket motors. Rayon replacement

EPM503-1 is a toughened, low heat release epoxy prepreg system designed for a variety of aircraft interior applications. EPM503-1 provides the low OSU heat release typically attributed to phenolic systems combined with the mechanical properties of an epoxy system. EPM503-1 is self-adhesive to honeycomb and has excellent surface finish. EPM503-1 is currently offered as a press grade system. Quality Certifications - Barrday Composite Solutions is ISO9001 and AS9100 certified.

BarrFlexTM U650 is an advanced para-aramid unidirectional material for soft armor ballistic applications. BarrFlexTM U650 consists of two plies of unidirectional product, cross-plied in 0°/90° configuration. Our proprietary UD technology aligns the fibers in each layer in a parallel direction. Each layer is individually constructed within a resin matrix.

U1661 is an advanced para-aramid unidirectional material for soft armor ballistic applications. U1661 consists of two plies of unidirectional product, cross-plied in 0°/90° configuration. Our proprietary UD technology aligns the fibers in each layer in a parallel direction. Each layer is individually constructed within a resin matrix.

TF200 is a polyetheretherketone (PEEK) fabric semi-preg that processes in the 700-750oF (370-400oC) temperature range. The materials are used in a variety of high performance, structural composite applications. PEEK is a high temperature semi-crystalline polymer with a good combination of toughness, chemical and solvent resistance, low moisture absorption and superior FST properties.

LC194 is an advanced phenolic prepreg system that is self-adhesive to aramid/phenolic and honeycomb core. LC194 offers very good and consistent adhesion property values (climbing drum peel strength) over a wide range of cure/laminating conditions. LC194 is self-extinguishing, and meets flammability requirements for use in aircraft interiors.

U681 is an advanced para-aramid unidirectional material for hard armor ballistic applications. U681 consists of two plies of unidirectional product, cross-plied in 0°/90° configuration. Our proprietary UD technology aligns the fibers in each layer in a parallel direction.

U611 is an advanced para-aramid unidirectional material for softarmor ballistic applications. U611 consists of four plies of unidirectional product, cross-plied in 0°/90°/0°/90° configuration. Our proprietary UD technology aligns the fibers in each layer in a parallel direction. Each layer is individually constructed within a resin matrix. Thermoplastic film is laminated to the top and bottom surfaces for abrasion resistance.

LC196 is an advanced, snap curing phenolic prepreg system that is self-adhesive to aramid/phenolic and aluminum honeycomb core. LC196 offers very good and consistent adhesion property values (climbing drum peel strength) over a wide range of curellaminating conditions. LC196 is self- extinguishing, and meets flammability requirements for use in aircraft interiors.

TF100 is a polyphenylene sulfide (PPS) fabric semi-preg that processes in the 600-650oF (315-345oC) temperature range. The materials are used in a variety of high performance, structural composite applications. PPS is a high temperature semi-crystalline polymer with a good combination of toughness, chemical and solvent resistance, low moisture absorption and superior FST properties.

LC294 is a phenolic prepreg system tailored to specific manufacturing and performance benefits for a variety of aircraft interior applications. LC294 provides extremely low OSU heat release combined with low smoke, self extinguishing, and excellent self adhesive properties and surface finish. LC294 is suitable for both press and bag molding operations. Quality Certifications - Barrday Composite Solutions is ISO9001 and AS9100 certified

EPM104 is a moderate Tg, highly toughened epoxy prepreg system designed for a wide varierty of industrial structural applications. EPM104 is suitable for autoclave, press or bag molding operations. Quality Certifications - Barrday Composite Solutions is ISO9001 and AS9100 certified.

TU1100 is a polyvinylidene fluoride (PVDF) fiber-reinforced uni-directional tape that processes is in the 350-400oF (175-200oC) temperature range. The prepreg is designed for oil & gas composite pipe and down-hole applications. PVDF is a semi-crystalline polymer with a good combination of strength, toughness, chemical and solvent resistance.

BarrFlexTM U471 is an advanced para-aramid unidirectional material for hard armor ballistic applications. Barrday BarrFlexTM U471 consists of two plies of unidirectional product, cross-plied in 0°/90° configuration. Each layer is individually constructed within a resin matrix. The resin matrix retains stability at elevated temperatures while the product maintains structural integrity after ballistic event. Material performance is dependent on product orientation. Always ensure the fiber orientation is correct.

TU200 is a polyetheretherketone (PEEK) fiber-reinforced uni-directional tape that processes in the 700-750oF (370-400oC) temperature range. The prepreg is used in a variety of high performance, structural composite applications. PEEK is a high temperature semi-crystalline polymer with a good combination of toughness, chemical and solvent resistance, low moisture absorption and superior FST properties.

PSR133 is a high performance phenolic resin available in neat resin and prepreg form. Prepregs manufactured with PSR 133 meet the stringent requirements of MIL-R-9299C, Grade B. PSR133 is the most cost effective phenolic available and offers excellent char yield for carbon/carbon applications and does not exhibit micro-cracking in high modulus composite structures.

EPH302 is a moderate Tg, highly toughened, controlled flow epoxy prepreg system that can cure in as low as 3 minutes via compression molding process and is designed for high volume, structural applications in automotive and other industrial markets. Quality Certifications - Barrday Composite Solutions is ISO9001 and AS9100 certified

PVB Phenolic resins are a family of thermoset resins that display outstanding structural rigidity, toughness, and adhesive strength. They are used primarily in ballistic helmet and vehicle applications once impregnated into high performance aramid fabrics. These fabrics offer exceptional ballistic performance in vehicle spall liner applications and versus fragmentation threats, as well as excellent structural and thermal properties. Standard configurations conform to MIL-DTL-62474 aramid fabric reinforced laminates for composite armor.

U730 is an ultra-high molecular weight polyethylene unidirectional material forsoft armor ballistic applications. U730 consists of four plies of unidirectionalof unidirectional product, cross-plied in 0°/90°/0°/90° configuration andplastic film. Each layer is individually constructed within a resin matrix usingBarrday’s proprietary UD technology to align the fibers in a parallel direction. BarrFlexTM U730 has been tested under various conditions including the NIJ 0101.06 Conditioning/Tumbling protocol.