Big Dog Adhesives BD54110 Epoxy Adhesive

BD54110 is a two-part, unfilled, room temperature cure, epoxy adhesive designed for the bonding of metals, ceramics, and many plastics. This product gives exceptional resistance to water, salt spray, inorganic acids and bases and most organic solvents. This product gives better water and temperature resistance than just about any standard 5 minute epoxy product on the market place. It is especially formulated for a 1:1 mix ratio for use in side by side cartridges, or to be used by hand mixing, or use with meter mix equipment. A handling cure is typically achieved at room temperature with 30 to 60 minutes with full cure in 24 hours. An elevated temperature cure schedule can be used to reach final properties quickly.

Product Type: 2K (2 component) Adhesive

Compatible Substrates & Surfaces: Ceramic, Metal, Plastics

Cure Method: Air Dry

Chemical Family: Epoxy & Epoxy Derivatives

Similar Products

  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Features & Benefits

Applications & Uses

Compatible Substrates & Surfaces
Cure Method

Properties

Component A
ValueUnitsTest Method / Conditions
Viscosity12000cps
Component B
ValueUnitsTest Method / Conditions
Viscosity20000cps
Cured Properties
ValueUnitsTest Method / Conditions
Working Time (at 75°F/ 24°C)8 - 12minutes
Fixture Time (at 75°F/ 24°C)30 - 60minutes
Full Cure (at Room Temperature, Movement)1hour
Full Cure (at Room Temperature, For Full Properties)24hours
Operating Temperature-40 to 266 (40 to 130)°F (°C)
Density (at Room Temperature, Mixed)9.5 (1.15)lbs/gal (g/cc)
Flash Point (at Room Temperature)min. 392 (min. 200)°F (°C)
Mix Ratio (Part A:Part B)1:1
Hardness (at Room Temperature)80Shore D
Tensile Strength (at Room Temperature, AL to AL)min. 2,300 psi
T-Peel (at Room Temperature)3 - 5pli
Elongation (at Room Temperature)5%
Impact Resistance (at Room Temperature)min. 150inch/lb
Water Absorption (for 24 hours)max. 1%
Volatile Organic Compounds (at Room Temperature)0% by weight

Regulatory & Compliance

Certifications & Compliance
Chemical Inventories

Storage & Handling

Shelf Life
12 Months
Storage & Handling
  • Bring both components to room temperature prior to mixing. Mix 1 part A to 1 part B by volume or weight thoroughly for 30 seconds.
  • Dispense mixed material over properly positioned devices to be glued together. Do not pour more than 1/2” thick as the product may exotherm too high and may boil. As this is a very quick adhesive, you must work quickly to bond the pieces together.
  • Parts may be shipped within 24 hours but parts can be moved in 1 hour.