Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Cure Methods and Times
Autoclave 2 hours at 275°F (135°C)
Internal Pressure 6 hours at 260°F (127°C)
Atmospheric
Step 1
Observe a gradual warm-up time until reaching 160°F (71°C)Step 2
24 hours at 180°F (82°C) or
20 hours at 200°F (94°C)Note: Cure times may require adjustment to compensate for heavy metal thickness, low exterior temperatures or other unusual factors.
- Applicator Notes
- VE515BNI may shrink 10% lengthwise after unrolling. Preshrink rubber before application.
- The temperature of the substrate must be greater than 60°F (15°C) prior to applying primer and rubber. Temperatures should not exceed 120°F (49°C).
- A heated table that warms rubber to approximately 120°F (49°C) prior to application is recommended.
- Strict adherence to adhesive specifications is required. Tack time is critical to the success of the bond.
Properties
- Color
- Physical Form
- Typical Physical Properties
Value Units Test Method / Conditions Adhesion To Metal 30.0 lbs. ASTM D429 Durometer 55.0 A ASTM D2240 Elongation at Break 700.0 % ASTM D412 Specific Gravity 1.24 - ASTM D927 Tensile Strength 2200.0 psi ASTM D412 - Typical Properties
Value Units Test Method / Conditions Atmospheric Cure 50-60 A - Pressure Cure 50-60 A - Skive Open - -
Technical Details & Test Data
- Adhesive System
1st Coat on Metal Chemlok® 205 2nd Coat on Metal Chemlok® 234B 3rd Coat on Metal Tack 201 On the rubber Tack 201 Each adhesive component requires thorough mixing before application.
Storage & Handling
- Storage Life From Date of Shipment
32°F (0°C) to 50°F (10°C) 180 days 51°F (13°C) to 65°F (19°C) 90 days 66°F (21°C) to 75°F (23°C) 60 days 76°F (23°C) to 85°F (30°C) 30 days Storage temperature must not exceed 85°F (30°C).