Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Features
- Low MeHQ levels
- Improves adhesion
- Enhances hardness
- High temperature resistance
- Increases weatherability
- Provides abrasion resistance
- Provides alkali resistance
- Low water absorption
Applications & Uses
- Markets
- Applications
- Applications
- Nail gels
- Coatings and inks for steel
- Coatings and inks for plastic
- Coatings and inks for glass
Properties
- Uncured Properties
Value | Units | Test Method / Conditions | |
Solids (butyl/ethyl acetate blend) | 24 | % | — |
Tack Free Time | min. 1.3 | — | — |
Viscosity (at 60°C) | 4200 | cP | — |
Technical Details & Test Data
- Typical Formulations
Adhesion Properties Substrate I30 I50 TM50 TP50 H50 HE30 ABS Aluminum XXX XXX X XXX Cold Rolled Steel
XX XXX X XX XXX Glass XXX XXX XXX HDPE PET PMMA Polycarbonate XX XXX XXX XXX Polypropylene PVC Stainless Steel XXX XXX X XXX X Recommended XX Highly Recommended XXX Strongly Recommended
Typical Formulations Test Formulation Name 130 150 TM50 TP50 H50 HE30 BR-742M 70 50 50 50 50 70 IBOA 30 50 TMPTA 50 TPGDA 50 HDDA 50 HEMA 30 Omnirad 184 2 2 2 2 2 2 Viscosity, 25°C* 5,400 930 — 1,000 450 2,200 * Brookfield – CAP 2000+ @ 25°C.
Cured Mechanical Properties Property I30 I50 TM50 TP50 H50 HE30 Tensile Strength, psi**
3,200 3,600 - 3 3,500 1,800 Elongation, 6** 210 120 - 17 9 180 Elastic Modulus, ksi*
1.6 20 - 40 65 2 Durometer Hardness
60D 75D - 70D 75D 60D Water Absorption, 96 (24 hrs)
0.4 0.3 - 0.5 0.4 2 MEK Double Rubs (#)
10 15 - 50 80 50 Tg(DMA)=45°C; Peak tan delta; cured with 2 phr of Omnirad® 184 ** Per ASTM D882 – Not Tested || Incompatible X Unable to Measure
- Viscosity Reduction with Reactive Diluents
Safety & Health
- General Information
This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irritation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes. For more information on the safe handling of this material, please refer to the Safety Data Sheet before use.