Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
Features & Benefits
- CASE Ingredients Features
- Product Highlights
- Low Shrinkage
- Enhances Flexibility
- Improves Adhesion
- Exhibits Hydrolytic Stability
- Provides Excellent Chemical and
- Temperature Resistance
Applications & Uses
- Applications
- Recommended Application
- Low Polarity Coatings
- High-Temperature Applications
- Thermoforming Coatings & Inks
Properties
- Uncured Properties
Value | Units | Test Method / Conditions | |
Pt-Co Color (APHA) | 40 | — | — |
Pt-Co Color | 40 | APHA | — |
Refractive Index (25°C) | 1.425 | — | — |
Density (25°C) | 1.12 | g/cm3 | — |
Viscosity (50°C) | 18,000 | cP | — |
Technical Details & Test Data
- Typical Formulations
Adhesion Properties Substrate I30 I50 TM50 TP50 H50 HE30 ABS XX X ‖ - Aluminum XXX XXX ‖ X X - Cold Rolled Steel
XXX XXX ‖ X XX - Glass XXX XXX ‖ - HDPE X XX ‖ - PET ‖ - PMMA XXX XXX ‖ - Polycarbonate XX XX ‖ XXX X - Polypropylene ‖ - PVC ‖ - Stainless Steel XXX XXX ‖ X X - X Recommended XX Highly Recommended XXX Strongly Recommended
Typical Formulations Test Formulation Name 130 150 TM50 TP50 H50 HE30 BR-742M 70 50 50 50 50 70 IBOA 30 50 TMPTA 50 TPGDA 50 HDDA 50 HEMA 30 Omnirad 184 2 2 2 2 2 2 Viscosity, 25°C* 1,800 400 ‖ 1,000 600 - * Brookfield – CAP 2000+ @ 25°C.
Cured Mechanical Properties Property I30 I50 TM50 TP50 H50 HE30 Tensile Strength, psi**
600 1,500 ‖ 600 800 - Elongation, 6** 400 240 ‖ 14 8 - Elastic Modulus, ksi*
0.95 4 ‖ 15 40 - Durometer Hardness
46A 35D ‖ 31D 30D - Water Absorption, 96 (24 hrs)
‖ - MEK Double Rubs (#)
3 3 ‖ 55 33 - Tg(DMA)=-112°C; Peak tan delta; cured with 2 phr of Omnirad® 184 ** Per ASTM D882 – Not Tested || Incompatible X Unable to Measure
- Viscosity Reduction with Reactive Diluents
Safety & Health
- General Information
This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irritation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes. For more information on the safe handling of this material, please refer to the Safety Data Sheet before use.