Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Product Highlights
- Non-Yellowing
- Low Shrinkage
- High Clarity and Gloss
- High Elongation
- High Abrasion Resistance
- Balance of Hardness and Flexibility
- High Impact Strength
- Low Skin Sensitivity
Applications & Uses
- Applications
- Compatible Substrates & Surfaces
- Recommended Application
- Nail Coating
- 3D Printing Inks
- Wood and Floor Coating
- Electronic Coatings and Inks
Properties
- Uncured Properties
Value | Units | Test Method / Conditions | |
Viscosity (60 °C) | 25,000 | cP | — |
Pt-Co Color (APHA) | 30 | — | — |
Pt-Co Color | 30 | APHA | — |
Refractive Index (25°C) | 1.48 | — | — |
Density (25°C) | 1.11 | g/cm3 | — |
Technical Details & Test Data
- Typical Formulations
Test Formulation Name I30 I50 TP50 TM50 H50 HE30 BR-742S
70 50 50 50 50 70 IBOA 30 50 TMPTA 50 TPGDA 50 HDDA 50 HEMA 30 Omnirad™ 481 2 2 2 2 2 2 Viscosity, 25°C (CAP2000+) 16.500
1.100 1.100 7.600 360 2.800 Cured Mechanical Properties
Property I30 I50 TP50 TM50 H50 HE30 Tensile Strength, (psi, ASTM D882) 4.500
6.900
4.900
6.500
5.800
4.200 Elongation (%, ASTM D882) 76 11 21 4 10 130 Elastic Modulus (ksi, ASTM D882) 80
160
85
194
105
10 Durometer Hardness 80D
82D 79D
90D
81D 76D
Water Absorption, %(24 hrs)
0.25 0.18 0.44 0.35 0.31 1.66 MEK Double Rubs (#) 29 17 129 >200 93 23 Tg(DMA) = 66°C; Peak tan delta; cured with 2 phr of Irgacure® 184 Adhesion Properties
Substrate I30 I50 TP50 TM50 H50 HE30 Aluminum XX XXX X X Cold Rolled Steel XX XX XX XX Glass X XXX XXX HDPE Polycarbonate XXX XXX XXX XXX XXX XX PET PMMA XX XXX X XXX XX Stainless Steel XXX XXX XX X XXX X - Recommended, XX - Highly Recommended, XXX - Strongly Recommended
- Viscosity Reduction with Reactive Diluents
Safety & Health
- General Information
This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irritation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes. For more information on the safe handling of this material, please refer to the Safety Data Sheet before use.