Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Base Chemicals Functions
- CASE Ingredients Functions
- Technologies
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
- Features
- Low viscosity
- Hydrolytic stability
- Abrasion and chemical resistant
- Excellent cure response
- Glossy finish
- Non-yellowing
- Stain resistant
- Impact resistant
Applications & Uses
- Markets
- Base Chemicals End Uses
- Ink & Toner Type
- Recommended Applications
-
Inkjet printing
-
Graphic arts
-
Rapid prototyping 3D printing resins
-
Properties
- Uncured Properties
| Value | Units | Test Method / Conditions | |
| Density (25 °C) | 1.12 | g/cm3 | — |
| Pt-Co(APHA) Color | 30 | — | — |
| Pt-Co Color | 30 | APHA | — |
| Refractive Index (25°C) | 1.489 | — | — |
| Viscosity (25 °C) | 10000 | cP | — |
Technical Details & Test Data
- Typical Formulations
Test FormulationName I30 I50 TM50 TP50 H50 HE30 BR-970BT 70 50 50 50 50 70 IBOA 30 50 TMPTA 50 TPGDA 50 HDDA 50 HEMA 30 Omnirad™ 184 2 2 2 2 2 2 Viscosity, 25°C 1,000 230 1,100 270 100 500 * Brookfield – CAP 2000+ @ 25°C.
Cured Mechanical Properties :
Property I30 I50 TM50 TP50 H50 HE30 Tensile Strength, psi 3,200 5,700 7,800 4,000 5,700 2,500 Elongation, % 35 6.0 4 15 11 65 Elastic Modulus, ksi 120 240 290 150 170 30 Durometer Hardness 75D 82D 88D 77D 80D 59A Water Absorption, % (24 hrs) 0.31 0.22 0.40 0.52 0.36 2.14 MEK Double Rubs (#) 16 19 >200 79 >200 11 T g (DMA ) =59°C;Peak tan delta; cured with 2 phr of Omnirad™ 184 ** Per ASTM D882 – Not Tested || Incompatible X Unable to Measure
Adhesion Properties :
Substrate I30 I50 TM50 TP50 H50 HE30 ABS XXX XX XXX Cold Rolled Steel Glass XX XXX XX XXX XXX X HDPE PET XX XXX XX XXX XXX X PMMA XXX X XX Polycarbonate XXX XX XXX XXX XXX PolypropylenePVC XXX XXX XXX XXX XXX Stainless Steel X Recommended XX Highly Recommended XXX Strongly Recommended
- Viscosity Reduction with Reactive Diluents
Safety & Health
- General Information
This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irritation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes. For more information on the safe handling of this material, please refer to the Safety Data Sheet before use.