Knowde Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
- Features
- Improves the storage stability of solvent-based oxidatively
- cured coating systems, printing inks and pigment pastes by
- preventing skin-formation on the surface of the coating while still in the container
- Controls surface dry retardation and keeps the film open
- longer to ensure deeper penetration of oxygen to lower film
- layers which promotes through dry and improves flow
- properties
- Can eliminate excessive dry time retardation with phenolics
- or the toxicity of oximic compounds
Applications & Uses
- Coating Type
- Applications
- Printing inks
- Clear or pigmented systems
- Coatings
- Solvent-based
- High solids oxidatively cured
- Environmentally friendly
- Dosage
- Ascinin® Anti Skin 0444 can be added to the system at any stage of the manufacturing process but it is highly recommended to add it as the final addition after driers. Pre-dilution is not recommended. The amount of Ascinin® Anti Skin 0444 depends on the type of binder and quantity of the driers used.
Properties
- Physical Form
- Appearance
- Clear, low-viscous, colorless to yellowish liquid
- Physical Properties
- Media
- Solvent-based
Value | Units | Test Method / Conditions | |
Density (at 20°C) | 0.86 - 0.90 | g/cm³ | DIN 51757 |
Solvent | Fatty acid esters | — | — |
Viscosity (at 20°C) | max. 45 | mPa·s | ISO 3219 (A) |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety
- No special labeling is required to meet EEC requirements. Ascinin® Anti Skin 0444 is not considered a dangerous cargo. For further safety information please refer to our safety data sheet.
Packaging & Availability
- Country Availability
- Regional Availability
- Availability
- All, Americas, Asia, EMEA
Storage & Handling
- Storage
- Protect from the effects of weathering and store at temperatures between 5 and 30 °C. Once opened, containers should be resealed immediately after each removal of the product.