Borchi® Gen 0650

1 of 99 products in this brand
Wetting and Dispersing Agent for Stabilizing Pigments and Fillers with Polar SurfacesBorchi® Gen 0650 is an anionic, APEO- and VOC-free wetting and dispersing agent for water- and solvent-based coating systems. This dispersant is highly effective in stabilizing pigments and fillers with very polar surfaces . These include titanium dioxide (TiO 2 ) , iron oxide , and hydrophilic organic pigments.

Functions: Dispersant, Wetting Agent

End Uses: Solventborne Coating, Waterborne Coating

Compatible Polymers & Resins: Alkyds

Labeling Claims: APEO-Free, VOC-free

Technical Data Sheet
  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

CASE Ingredients Functions
Technologies

Features & Benefits

Labeling Claims
CASE Ingredients Features
Features
  • Specifically designed for stabilizing fillers and pigments with polar surfaces like titanium dioxide, iron oxides and hydrophilic organic pigments
  • May significantly improve the color of tinted white and clear alkyd-based coatings
  • Low viscosity dispersions

Applications & Uses

Compatible Polymers & Resins
Dosage

Recommended amounts of Borchi® Gen 0650 in % (supply form) based on pigment content:

  • Titanium dioxide: 1 - 4 %
  • Inorganic pigments: 5 - 15 %
  • Organic pigments: 10 - 30 %

The amount depends on the particle size and surface area of the pigment. The exact dosage should be experimentally determined.

Properties

Physical Form
Appearance
High-viscous, colorless to yellow liquid
Physical Properties
ValueUnitsTest Method / Conditions
Density1.02 - 1.06g/cm³
pH (Aqueous Solution 10%)6 - 7.5
Viscositymax. 3,000mPa.s
Non Volatile Content100%

Regulatory & Compliance

Packaging & Availability

Regional Availability
  • Global

Storage & Handling

Storage Conditions

Protect from the effects of weather and store at temperatures between 5 and 30 °C. Slight turbidity may occur during storage but this does not affect the performance of the product. Once opened, containers should be resealed immediately after each removal of the product.