Products

BRUGGOLEN® M1417 is our modifier for both chain build-up and chain disintegration. For example, with its “chain shortener”, the molecular weight of highly viscous polyamide wastes can be transformed into high-performance injection molding types, whose mechanical properties correspond to those of off-the-shelf new injection molded types of the same viscosity. Cost advantages included. BRUGGOLEN® M1417 - Chain Breaking Agent for the recycling of High Viscous Polyamide Waste Controlled and reproducible reduction of molecular weight: Exact adjustment of the relative viscosity to specified target values Upcycling to injection molding grades Generating flow properties and mechanical performance comparable to that of prime material Allowing cost advantages through the usability of scrap and waste material due to the reuse of waste material enabling recycling of cast nylon waste

BRUGGOLEN® P22 is a highly efficient nucleating agent for polyamides. The addition of Bruggolen® P22 to the polymer melt leads to fine particles which induce a very fine and homogeneous crystalline structure.FeaturesIncreases crystallinityReduces cycle time during injection moldingImproves dimensional stability - significant reduction of warping in GF-reinforced compoundsImproves mechanical properties (tensile strength, stiffness, flexural modulus, etc.)Increases heat distortion temperatureNon-volatile; non-extractable

BRUGGOLEN® TP-R2090 is our recycling additive for polyolefins Bruggolen® R recycling additives improve the polyolefin recycling processes and help recyclers to produce higher value polyolefine recyclates for long term applications. For the first time the new repairing technology allows to repair damages from prior use. BRUGGOLEN® TP-R2090 for Upcycling of post-industrial and post-consumer polypropylene waste streams: Repair of damage in the polymer chains by novel chemical system. High quality recyclates for demanding long term applications Prolonged retention of mechanical properties during long term heat aging. One-Pack solution stabilizes the recycling process

BRUGGOLEN® P1507 is an effective flow enhancer for polyamides in the form of polymeric granules. Improved flow and outstanding mechanical properties: Outstanding melt flow; significantly longer spiral-flow filling No influence on mechanical properties (modulus of elasticity, tensile strength, elongation, and impact strength is retained) Better processability of glass-fiber-reinforced polyamides Offers advantages for injection-mold processing, such as shorter cycle times, lower energy consumption, use of highly complex part designs Easy to dose and disperse

BRUGGOLEN® Recycling R8895 is a recycling additive for polyolefines. It is used for upcycling Polypropylene from car battery cases: Repair of damage in the polymer chains by a novel chemical system. High-quality recyclates for demanding long-term applications Prolonged retention of mechanical properties during long-term heat aging. Neutralization of acidic contaminations. One-Pack solution stabilizes the recycling process. Bruggolen® R recycling additives improve the polyolefin recycling processes and help recyclers to produce higher-value polyolefine recyclates for long-term applications. For the first time, the new repairing technology allows repairing damages from prior use.

BRUGGOLEN® TP-H1805 - High Heat Stabil­izer for Aliphatic Poly­amides above 200°C. It is a granular form heat stabilizer package with synergists. Powerful long-term protection of aliphatic polyamides at very high temperatures: PA6 up to 200°C, PA6.6 up to 230°C: tensile strength retention >50% for 3000 h at 200°C no activation required easy processing during compounding upgrades aliphatic polyamides to the performance range of high temperature nylons

BRUGGOLEN® H164 is a synergistic mixture of sterically hindered phenolic antioxidants and phosphonates in powder form. Our phenol-based stabilizer BRUGGOLEN® H164 is reaching a long-term protection of polyamides against heat aging for technical applications such as:Non-discoloringExcellent in glass fiber reinforced or mineral-filled polyamides

BRUGGOLEN® H10 is a very efficient processing stabilizer which protects polyamides against degradation and discoloration during processing caused by shear and thermal stress.Features:Reduced yellowing during melt processingProtection against discoloration after aging by heat and by UV lightNon-volatilityResistance against hydrolysisEspecially suited for glass-fiber reinforced polyamides