Chemical Products Industries, Inc.

TZ-Paint Prep™ is a waterborne high performance blend of anionic and nonionic surface active agents that will remove oil, grease and dirt residue from any washable surface. It is biodegradable, non-hazardous and VOC compliant. TZ-PAINT PREP™ is formulated for quick, thorough lifting and suspension of contaminants for easy rinsing. TZ-PAINT PREP™ has undergone years of field trials and testing to meet government regulations for safe, non-toxic chemicals and is authorized by the USDA for use in federally inspected meat and poultry plants.

TZ-Floor Prep™ is a waterborne high performance blend of anionic and nonionic surface active agents that willre- move oil, grease and dirt residue from any washable surface. It is biodegradable, non-hazardous and VOC compliant. TZ-FLOOR PREP™ is formulated for quick, thorough lifing and suspension of contaminants for easy rinsing.TZ-FLOOR PREP™ has undergone years of field trials and testing to meet government regulations for safe, non-toxic chemicals and is authorized by the USDA for use in federally inspected meat and poultry plants.

CP-1007™ is a non-flammable, non-toxic, non-acid, penetrating silicate sealer that strengthens and internally waterproofs cementious materials. CP-1007 is water-based and environmentally friendly. Unlike membrane forming sealers which can be worn away in high traffic areas’, leaving unprotected concrete unsightly and susceptible to chemical attack, CP-1007 penetrates into the surface and cannot be scratched or peeled off. When applied to concrete or masonry, CP-1007 reacts with calcium hydroxide and reduces porosity and permeability of the concrete matrix. This serves to increase the hardness and chemical resistance which, in turn, increases the service life of the surface. In conditions where salt air and humidity attack the concrete, causing oxidation of the reinforcing steel, CP-1007 has proved to halt such corrosion activity. When the CP-1007 is applied to concrete exposed to such conditions, exfoliation or expulsion of the chlorides takes place. The CP-1007 reacts with free alkali in the concrete forming a silica hydrogel that fills the capillaries within the matrix. This hydrogel waterproofs and seals the surface after all materials harmful to the concrete are removed. This process could take up to thirty days or longer, depending on the chloride and acidic residual concentration within the capillaries.

MMR™ Restoration Cleaner is a safe and highly efficient alternative to aggressive and/or harsh cleaners traditionally used for cleaning masonry, tile and stone surfaces. MMR Restoration Cleaner is an alkaline, ambient temperature cleaner designed to remove mold, mildew, algae, moss, dirt, grease, black streaks, and many other biological deposits from new and existing surfaces.

PERCO® CATALYST is a fixed-bed Mercaptan (RSH) conversion process for liquid and gaseous hydrocarbon streams. The PERCO® CATALYST converts light Mercaptans to odorless, non-corrosive disulfides. The process is commercially proven to meet product and pipeline specifications e.g. copper strip test, negative doctor test, or low Mercaptan sulfur (ppm). PERCO® CATALYST offers low pressure-drop, long bed life, simplistic in its design and operates over a broad range of flow rates and temperatures. PERCO® CATALYST is a reliable long-term solution for the reduction of mercaptans.

An odorless, water based solution of potassium methyl siliconate developed to effectively treat a wide range of natural stone and masonry surfaces. CP-1000 provides long-lasting protection without altering the natural appearance of the substrate.

SILANE WB CONCENTRATE™ is a VOC compliant modified silane water repellent concentrate designed for dilution with fresh potable water at the jobsite. When diluted, SILANE WB CONCENTRATE™ may be applied to vertical and horizontal, dense and porous masonry surfaces. SILANE WB CONCENTRATE™ is solvent free and VOC compliant. Prepared solutions react with the silica in concrete and masonry in the presence of ultraviolet light and atmospheric moisture. This reaction forms strong permanent bonds beneath the surface and creates a hydrophobic zone that prevents water molecules from penetrating, while allowing free migration of water vapors. The chemical bonds formed in this process become an integral part of the substrate and provide long-term water repellent protection.

SW-244 is a clear penetrating, breathable water repellent designed for the protection of exterior above-grade concrete, brick masonry, and some natural stones from the damage caused by water intrusion. It penetrates the surface and bonds chemically to the substrate, resulting in permanent attachment of the water repellent molecule. SW-244 is not a coating and as a result will not discolor or change the surface appearance in any way.

DithiaZolv™ is a concentrated mixture of proprietary and powerful surfactants specifically formulated to breakdown and dissolve dithiazine solids formed when triazine based H2S scavengers are used in oil and gas operations. Dissolving these solids into a water based slurry allows for easy final rinsing and cleaning. DithiaZolvTM helps optimize flow performance in pipelines, valves, filters, tanks and related process equipment.