Products

HANSA CARE 7140 ECO is a silicone solution used as an ingredient for home and car care applications. These aminosiloxanes are modified siloxanes with nitrogen groups. The modification degree leads to optimal performance in aqueous or solvent-borne formulations for home and car care applications. These products are excellently suited for use in polishes, wax formulations, and drying aids in automatic or manual car washes. It also provides perfect drying characteristics such as good water repellence and excellent gloss.

CHT Group TE-35K FG is a 40% active food-grade emulsion with superb stability over a wide pH range. This product is best suited for de-nesting plastics used in thermoforming for all food packaging resins, rubber treatment, canning applications, and conveyor belts and lubrication.

HANSA CARE 6720 ECO is a PDMS emulsion that is used as a universal ingredient for formulating home and car care products. This product is easy to use and has good dilution stability. It can be used to improve gloss, smoothness, softness, and water repellency in the following application areas: Leather and furniture care Car care Tire and vinyl care Polishes

CHT Group AS1803 is a non-corrosive, neutral-cure, 1-part, RTV (Room Temperature Vulcanizing) silicone adhesive sealant. It is one in a range of acetone-cure products that are solvent-free. It exhibits excellent primerless adhesion to many substrates and cures rapidly at room temperature to form a tough rubber when in contact with atmospheric moisture. This product will not corrode copper or its alloys and is suitable for use with electronic components.

CHT Group DF-255 is an organic defoamer with 100% active content. This product provides excellent lubricity in industrial applications. Applications Pulp and paper Grinding applications Fermentation Distillation Latex Adhesives

CHT Group JPA-15 FLW is a flowable powdered antifoam that can be easily incorporated into dry formulations, including “water dispersible granular.” It has a virtually instant release of active due to the rapid dissolution of base powder. Applications Agrichemicals: Wettable powders, tank add defoamers Concrete: cement admixtures, patch and repair formulations

CHT Group TA-7110 is a silicone antifoam emulsion with 10% actives. It is used in industries for foam management and is formulated to rinse out most substrates thoroughly. Belonging to the TA series, this product provides consistent performance in many standard applications. Applications Carpet dyeing Industrial cleaning Textiles Chemical processing

BIOLAY 500 is a specialized powder designed for grease barrier coating formulations. It's composed of a mixture of polysaccharides, making it a plant-based and environmentally friendly choice. One of its notable features is that it's entirely free from fluorine and doesn't generate microplastics, aligning with sustainable and safety standards. You can easily apply aqueous solutions of BIOLAY 500 to paper and cardboard, making it an ideal choice for creating effective grease barriers in these materials. Unlike BIOLAY 100, BIOLAY 500 has been optimized for exceptional oil repellency, making it a preferred option for applications where this property is crucial. It's important to note that solutions of BIOLAY 500 may have higher viscosities compared to BIOLAY 100, even at the same solids content.

CHT Group XAF-101 is an extreme-performance polymer blend with 100% active content. This foam management solution has excellent knockdown and persistence. It works effectively even at low concentrations and in both hot and cold systems. Applications Coatings Wastewater treatment Oil and gas processing Pulp and paper Grinding applications

ICM 1670E is an industrial nonionic polydimethylsiloxane emulsion designed for various applications. It excels in tire dressing, leather conditioning, rubber treatment, and fiberglass treatment. Notable features of ICM 1670E include industry-leading particle size, excellent freeze-thaw stability, impressive gloss, and water repellency. Its formulation is such that it can be easily dispersed with water with minimal agitation, contributing to its versatility and ease of use in various industrial applications.

CHT Group TufGel 336 is one of a family of soft, adherent, silicone elastomeric gels designed for the encapsulation and protection of electronic components. It is a low-viscosity, two-component system that is readily mixed in a 1:1 ratio. It is used to provide protection from vibration, thermal or mechanical shock, water, and many other environmental contaminants. This product has excellent dielectric properties.

CHT Group ICM-DF-289 is a specialty blend with 10% actives. This product is used in defoaming, cutting, and grinding solutions. It is ideal when extreme stability, low foam, and extended lubricity are required. This foam management product is customizable and water-dispersible.

CHT Group QSil 559 is a 100% silicone solid elastomer designed for electrical potting applications. This addition-cure potting material is a two-component system that has a long gel time. It offers a hard, thermally conductive, low-modulus material that is readily repairable.

CHT Group ACC17 is a fast-curing, low-viscosity, low-volatile, 1-component, condensation-curing silicone coating. The uncured product can be applied by pouring or spraying and is readily cured into a tough, transparent rubber. It can be used to coat printed circuit boards to prevent the ingress of water and environmental contaminants.

CHT Group QSil 553 is a 2-component silicone elastomer system specially designed for electronic potting and encapsulation applications. It offers good protection against chemicals, environmental contamination, mechanical shock, vibration, and impact damage. It can be employed in areas where low flammability is a prerequisite. The cured elastomer can be repaired. The component parts have relatively low viscosities and are readily mixed, either by hand or machine.

CHT Group TE-352 FG is a 40% active food-grade emulsion with superb stability over a wide pH range. Its exceptional particle size and tight distribution also provide excellent freeze-thaw stability. This product is designed specifically for the de-nesting of plastics used in thermoforming, conveyor belts, and lubrication applications.

CHT Group TA-205I is an easy-to-disperse 5% active emulsion of a silicone antifoam compound. This product is specifically designed for chemical processing, pool, and spa applications. Belonging to the TA series, this product provides consistent performance in many standard applications.

CHT Group TC-3023 is a food-grade, water-dispersible, 30% active silicone defoamer, with neutral pH. This antifoam is specially formulated to control foam in agriculture spraying applications. It is compatible with most aqueous processing applications however, it is advisable to screen each application before use. Key Applications Agriculture applications, including crop spraying Amine scrubbing Oil and gas processing Specialty chemical formulations

CHT Group JAF antifoam series products are water-dispersible, active silicone defoamers of various concentrations. They are formulated to control foam in a wide variety of industrial applications that have extreme pH systems. These products have excellent foam knockdown and persistence. They work effectively even at low concentrations and in both hot and cold systems.

ALPA-LSR 130201 is a liquid silicone rubber product in the SilSo injection molding range that is suitable for use in nearly all industrial applications due to its multifunctional mechanical and chemical properties. They crosslink without any by-products, and when combined with injection molding, these silicones enable fast, high-volume production of tiny components with complex shapes and fine details. Due to their biocompatible, odorless, and good haptic properties, they are the first choice for many medical and orthopedic products. Their high-temperature stability, good insulating properties, and low compression set are advantageous for the industrial processing of seal rings, plug-in connectors, and membranes.

CHT Group TA-1720 is a 100% active silicone-organic antifoam compound with excellent foam knockdown and persistence. This product works effectively even at low concentrations and in both hot and cold systems. Applications Bacterial and yeast fermentations Waste water treatment Food starch and protein washes

CHT Group TA-116 is a water dispersible 50% active silicone industrial defoamer with excellent foam knockdown and persistence. It works effectively even at low concentrations and in both hot and cold systems. Applications Detergents Laundry applications Coatings Waste Water treatment Oil and gas processing Pulp and paper Grinding applications

ALPA-LSR 140201 is a liquid silicone rubber product in the SilSo injection molding range that is suitable for use in nearly all industrial applications due to its multifunctional mechanical and chemical properties. They crosslink without any by-products, and when combined with injection molding, these silicones enable fast, high-volume production of tiny components with complex shapes and fine details. Due to their biocompatible, odorless, and good haptic properties, they are the first choice for many medical and orthopedic products. Their high-temperature stability, good insulating properties, and low compression set are advantageous for the industrial processing of seal rings, plug-in connectors, and membranes.

Low viscosity aminosiloxane with a high water repellence.

CHT Group QSil 214 is a transparent and colorless silicone formulation that is ideal for optical applications. Its viscosity profile enables excellent flow around components, and it is excellent for potting complex parts. The chemical composition results in a cured product that is hydrolytically stable as well as reversion-resistant. The silicone elastomer provides electrical insulation and physical shock resistance for components and enables environmental protection.

CHT Group QSil 223 is a transparent and colorless silicone formulation that is ideal for optical applications. Its viscosity profile enables excellent flow around components, and it is excellent for potting complex parts. The chemical composition results in a cured product that is hydrolytically stable as well as reversion-resistant. The silicone elastomer provides electrical insulation and physical shock resistance for components and enables environmental protection.

CHT Group TA antifoam series products are water-dispersible, active silicone defoamers that are formulated to control foam in various industrial processes. These products have excellent foam knockdown and persistence. They work effectively even at low concentrations and in both hot and cold systems.

CHT Group ACC15 is a low-viscosity, 1-component, condensation-curing silicone coating. The uncured product can be applied by pouring or brushing and is readily cured into a tough, transparent rubber. It can be used to coat printed circuit boards to prevent the ingress of water and environmental contaminants.

CHT Group DF-289 is an industrial antifoam with 100% actives. This organic defoamer is used for grinding applications.

CHT Group ICM-DF-758 is a specialty blend with 45% actives. This product is used in defoaming, cutting, and grinding solutions. It is ideal when extreme stability, low foam, and extended lubricity are required. This foam management product is customizable and water-dispersible.

CHT Group DF-758 is a 45% active silicone antifoam emulsion that is formulated to control foam in a wide variety of industrial applications. It was designed as a glass grinding aid to facilitate defect-free glass polishing. This product is ideal when low foam and excellent lubricity are needed.

CHT Group AS1740 is part of a range of high-performance RTVs. It is a neutral cure silicone sealant specifically designed to meet the physical, chemical, and temperature resistance requirements of MIL-A-46146B. It features exceptional physical properties and is compatible with many sensitive substrates, including copper, brass, steel, aluminum, and FR4, making this an ideal option for many electronic applications where high performance is paramount. The alkoxy cure system produces a silicone sealant with excellent adhesion to most common substrates.

CHT Group XAF-102 is a 100% active, self-dispersing antifoam compound. It is formulated for specialized applications that require a high-active solution to combat high pH foaming systems. Belonging to the XAF series, this product provides outstanding performance in extreme environments.

CHT Group EM 1463 FG is CHT’s premier 35% active food-grade emulsion that can be diluted to 1% active. It has small particle size and is the best de-nester with extreme dilution. It can be used in continuous process plastic molding as an antistatic for food-grade packaging and for de-nesting of plastics used in thermoforming.

CHT Group TA-5012 is an aqueous emulsion of silicone-based compound designed for foam management in agrochemical applications. It works well even at low concentrations and in both hot and cold systems and has great foam knockdown, and persistence. Applications Agrichemical spraying Chemical processing Bulk blending operations.