Products

CHT Group

Ready-to-Use ProductsProduct Families

Adhesives & Sealants

Cleaners

Paints & Coatings

Foams

41 Products found on CHT Group in Ready-to-Use Products

SDSWith SDS

TDSWith TDS

TUBIBOND HM 61 NEW

Product Type:Waterborne Adhesive, Adhesive, Hot Melt Adhesive
Compatible Substrates & Surfaces:Painted Surfaces, Paper
Chemical Family:Polyolefins

TUBIBOND HM 61 NEW is a fast-setting polyolefin with 99% active content. It is an ideal water-based paper and packaging adhesive for substrates such as paper and PE-coated materials. Part of the TUBIBOND range, this paper adhesive ensures an ecologically conscious use of resources and contributes to the sustainability goals of the packaging industry.

CHT Group SE3000

Product Type:Encapsulant, 2K (2 component) Adhesive, Potting Compound
Application Area:Passenger Protection System, PTC Heater, Electric Motors, EV Charging Stations, Battery Management System (BMS), LEDs, Driving Support System, Inverter, Brake System, On-board Charger, Control Units, ADAS (Advanced Driver Assistance Systems), Electric Vehicle (EV) Batteries, Automotive Converter
Cure Method:Chemical Cure
Chemical Family:Silicones

CHT Group SE3000 is a 2-component silicone elastomer system specially designed for electronic potting and encapsulation applications. It offers good protection against chemicals, environmental contamination, mechanical shock, vibration, and impact damage. It can be employed in areas where low flammability is a prerequisite. The cured elastomer can be repaired. The component parts have relatively low viscosities and are readily mixed, either by hand or machine.

CHT Group QSil 216

Product Type:Potting Compound, Encapsulant, Solvent free (100% Solids) Adhesive, 2K (2 component) Adhesive
Application Area:Optical Applications
Cure Method:Chemical Cure
Chemical Family:Silicones

CHT Group QSil 216 is a transparent and colorless silicone formulation that is ideal for optical applications. Its viscosity profile enables excellent flow around components, and it is excellent for potting complex parts. The chemical composition results in a cured product that is hydrolytically stable as well as reversion-resistant. The silicone elastomer provides electrical insulation and physical shock resistance for components and enables environmental protection.

CHT Group QSil 550LV A&C

Product Type:Potting Compound, Encapsulant, Solvent free (100% Solids) Adhesive, 2K (2 component) Adhesive
Cure Method:Chemical Cure, Air Dry
Chemical Family:Silicones

CHT Group QSil 550LV A&C is a 100% silicone solids elastomer designed for electronic potting applications. This addition-cure potting elastomer is a two-component system that offers a hard, thermally conductive, low-modulus material that is readily repairable. It cures at room temperature.

ICM EM 1MM

Product Type:Automotive Polishes
Application Area:Automotive Applications, Car
Features:Low Viscosity, Excellent Spreadability, Good Stability, Matting, Good Surface Care, Matte Finish, Enhances Color, Long Term Protection, Gloss, Easy To Apply, Good Color Stability, Water Repellent, Easy To Clean, Surface Smoothing, Color Stability, Rub Off Effect, Excellent Drying Properties, Detergent Resistant, Excellent Durability, Levelling, Water Resistant

ICM EM 1MM is a ready-to-use product tailored for vehicle and machinery maintenance. Within the HI&I care market, particularly in institutional and industrial care and home care, ICM EM 1MM offers features such as long-term protection, good surface care, color enhancement, good color stability, water resistance, detergent resistance, easy cleaning, excellent drying properties, matte finish, matting, easy application, excellent spreadability, good stability, and low viscosity.

TUBIBOND PR 169

Product Type:Adhesive, Waterborne Adhesive
Compatible Substrates & Surfaces:Paper
Chemical Family:Acrylics & Acrylates

TUBIBOND PR 169 is an acrylic emulsion with 50% active content and a fast setting time. This barrier coating is biodegradable and is used as a water-based paper and packaging adhesive for substrates such as paper cups, paper straws, and paper surfaces.

CHT Group TufGel 330

Product Type:Encapsulant, 2K (2 component) Adhesive, Potting Compound
Application Area:Sensors, Passenger Protection System, Control Units, ADAS (Advanced Driver Assistance Systems), Battery Management System (BMS), Electric Vehicle (EV) Batteries, Driving Support System
Cure Method:Chemical Cure
Chemical Family:Silicones

CHT Group TufGel 330 is one of a family of soft, adherent, silicone elastomeric gels designed for the encapsulation and protection of electronic components. It is a low-viscosity, two-component system that is readily mixed in a 1:1 ratio. It is used to provide protection from vibration, thermal or mechanical shock, water, and many other environmental contaminants. This product has excellent dielectric properties.

CHT Group QSil 214

Product Type:Encapsulant, 2K (2 component) Adhesive, Potting Compound
Application Area:Sensors, Aerospace Applications, LEDs, Optical Applications
Cure Method:Chemical Cure, Air Dry
Chemical Family:Silicones

CHT Group QSil 214 is a transparent and colorless silicone formulation that is ideal for optical applications. Its viscosity profile enables excellent flow around components, and it is excellent for potting complex parts. The chemical composition results in a cured product that is hydrolytically stable as well as reversion-resistant. The silicone elastomer provides electrical insulation and physical shock resistance for components and enables environmental protection.

BIOLAY 500

Product Type:Coating
Compatible Substrates & Surfaces:Cardboards, Paper
Features:Good Grease Resistance
Application Method:Curtain Coating, Size Press
Chemical Family:Polysaccharides

BIOLAY 500 is a specialized powder designed for grease barrier coating formulations. It's composed of a mixture of polysaccharides, making it a plant-based and environmentally friendly choice. One of its notable features is that it's entirely free from fluorine and doesn't generate microplastics, aligning with sustainable and safety standards. You can easily apply aqueous solutions of BIOLAY 500 to paper and cardboard, making it an ideal choice for creating effective grease barriers in these materials. Unlike BIOLAY 100, BIOLAY 500 has been optimized for exceptional oil repellency, making it a preferred option for applications where this property is crucial. It's important to note that solutions of BIOLAY 500 may have higher viscosities compared to BIOLAY 100, even at the same solids content.

CHT Group QGel 311UV

Product Type:Potting Compound, Encapsulant, 2K (2 component) Adhesive
Cure Method:Chemical Cure, Air Dry
Chemical Family:Silicones

CHT Group QGel 311UV is a clear, soft, moderately cross-linked, special-purpose, addition-cure silicone gel polymer. This silicone gel provides protection from moisture, vibration, thermal, or mechanical shocks. It is a fast-curing, inhibition-resistant gel with a UV tracer for easy identification.

TUBIBOND PR 145 P

Product Type:Waterborne Adhesive, Adhesive
Compatible Substrates & Surfaces:Painted Surfaces, Paper
Chemical Family:Acetates

TUBIBOND PR 145 P is a versatile product that is suitable for use in paper and packaging machines. It has a highly optimized drying time, making it ideal for meeting the high demands of the paper bag and corrugated box manufacturing processes. Because of its concentrated active content, even a small amount of application can provide extremely strong adhesion.

ICM EM 1624

Product Type:Automotive Polishes
Application Area:Car, Glass Surface, Automotive Applications, Automotive Engine, Vehicle Glass, Tire, Automotive Exteriors, Fabric
Compatible Substrates & Surfaces:Leather, Plastics
Chemical Family:Silicones
Features:Easy To Clean, Surface Smoothing, Facilitates Water Sheeting, Levelling, Water Resistant, Hydrophobic, Excellent High Surface Gloss, Good Surface Gloss, Low Viscosity, Good Stability, Excellent Cleaning, Wax Effect, Matting, Good Surface Care, Matte Finish, Facilitates Water Beading, Enhances Color, Excellent Compatibility, Long Term Protection, Gloss, Good Color Stability, Water Repellent, Excellent Hydrophobic Properties, Degreasing, Color Stability, Rub Off Effect, Protects Metal Surfaces, Excellent Drying Properties, Detergent Resistant, Excellent Durability, Excellent Spreadability, Beading, High Durability, Easy To Apply, Superior Surface Quality

ICM EM 1624 is a unique product is a microemulsion consisting of a distinctive blend of silicone polymers. These specialized polymers are formulated to rapidly and effectively hydrophobe and protect various automotive surfaces. ICM EM 1624 is particularly well-suited for applications in automotive care, including leather treatment, fabric care, and glass treatments.

BIOLAY 100

Product Type:Coating
Compatible Substrates & Surfaces:Cardboards, Paper
Features:Good Grease Resistance
Application Method:Curtain Coating, Size Press
Chemical Family:Polysaccharides

BIOLAY 100 is a versatile powder designed for grease barrier coating formulations. In its off-white powder form, BIOLAY 100 offers a sustainable and eco-friendly solution for various applications. This product, derived from plant-based raw materials, is entirely free from fluorine and microplastics, aligning with environmental and safety standards. BIOLAY 100 can be easily applied using standard coating equipment like film presses, size presses, blade coaters, or curtain coaters. When applied to paper and cardboard, it demonstrates exceptional grease barrier properties, making it an ideal choice for eco-conscious and effective barrier coating solutions.

CHT Group TufGel 336

Product Type:Potting Compound, Encapsulant, 2K (2 component) Adhesive
Application Area:Aerospace Applications
Cure Method:Chemical Cure
Chemical Family:Silicones

CHT Group TufGel 336 is one of a family of soft, adherent, silicone elastomeric gels designed for the encapsulation and protection of electronic components. It is a low-viscosity, two-component system that is readily mixed in a 1:1 ratio. It is used to provide protection from vibration, thermal or mechanical shock, water, and many other environmental contaminants. This product has excellent dielectric properties.

CHT Group QSil 573

Product Type:Potting Compound, Encapsulant, Solvent free (100% Solids) Adhesive, 2K (2 component) Adhesive
Cure Method:Chemical Cure
Chemical Family:Silicones

CHT Group QSil 573 is a 100% silicone solid elastomer designed for electronic potting applications. This addition-cure potting elastomer is a two-component system that offers a hard, thermally conductive, low-modulus material that is readily repairable. This product has excellent thermal conductivity.

CHT Group QSil 220

Product Type:Encapsulant, 2K (2 component) Adhesive, Potting Compound
Application Area:Aerospace Applications, Optical Applications
Cure Method:Heat Cure, Chemical Cure
Chemical Family:Silicones

CHT Group QSil 220 is a transparent and colorless silicone formulation that is ideal for optical applications. Its viscosity profile enables excellent flow around components, and it is excellent for potting complex parts. The chemical composition results in a cured product that is hydrolytically stable as well as reversion-resistant. The silicone elastomer provides electrical insulation and physical shock resistance for components and enables environmental protection.

ICM EM 1630

Product Type:Automotive Polishes
Application Area:Car, Automotive Applications
Chemical Family:Siloxanes
Features:Easy To Clean, Surface Smoothing, Facilitates Water Sheeting, Levelling, Water Resistant, Hydrophobic, Low Viscosity, Good Stability, Excellent Cleaning, Wax Effect, Matting, Good Surface Care, Matte Finish, Facilitates Water Beading, Enhances Color, Long Term Protection, Gloss, Good Color Stability, Water Repellent, Color Stability, Rub Off Effect, Excellent Drying Properties, Detergent Resistant, Excellent Durability, Excellent Spreadability, Beading, High Durability, Easy To Apply

ICM EM 1630, designed for automotive applications in both institutional and industrial care and home care, offers a ready-to-use solution for vehicle and machinery maintenance. This provides:

Long-term protection
Good surface care
Color enhancement
Excellent color stability
Water resistance
Detergent resistance
High durability
Easy cleaning
Excellent drying properties
Matte finish
Matting
Easy application
Excellent spreadability
Good stability
Low viscosity
Rub-off effect
Water beading facilitation
Water sheeting facilitation
A wax effect.

ICM EM 1616

Product Type:Automotive Polishes
Application Area:Car, Glass Surface, Automotive Applications, Automotive Engine, Vehicle Glass, Tire, Automotive Exteriors, Fabric
Compatible Substrates & Surfaces:Leather, Plastics
Chemical Family:Silicones
Features:Surface Smoothing, Levelling, Water Resistant, Hydrophobic, Good Surface Gloss, Low Viscosity, Good Stability, Good Surface Care, Enhances Color, Excellent Compatibility, Long Term Protection, Gloss, Good Color Stability, Water Repellent, Excellent Hydrophobic Properties, Degreasing, Color Stability, Rub Off Effect, Protects Metal Surfaces, Excellent Drying Properties, Excellent Durability

ICM EM 1616 is a microemulsion featuring a unique aminofunctional silicone. This specialized aminosilicone is formulated for rapid and effective hydrophobing and protection of various automotive surfaces. ICM EM 1616 is well-suited for applications in automotive care, including leather treatment, fabric care, and glass treatments.

CHT Group QSil 559

Product Type:Potting Compound, Encapsulant, Solvent free (100% Solids) Adhesive, 2K (2 component) Adhesive
Application Area:Aerospace Applications
Cure Method:Chemical Cure
Chemical Family:Silicones

CHT Group QSil 559 is a 100% silicone solid elastomer designed for electrical potting applications. This addition-cure potting material is a two-component system that has a long gel time. It offers a hard, thermally conductive, low-modulus material that is readily repairable.

CHT Group QGel 311

Product Type:Encapsulant, 2K (2 component) Adhesive, Potting Compound
Application Area:Sensors, Passenger Protection System, Control Units, ADAS (Advanced Driver Assistance Systems), Driving Support System
Cure Method:Chemical Cure, Air Dry
Chemical Family:Silicones

CHT Group QGel 311 is a clear, soft, moderately cross-linked, general-purpose, addition-cure silicone gel polymer. This silicone gel provides protection from moisture, vibration, thermal, or mechanical shocks. It is a fast-curing, inhibition-resistant gel that is commonly used in a variety of electronic applications.

ICM EM 1612

Product Type:Automotive Polishes
Application Area:Car, Glass Surface, Automotive Applications, Automotive Engine, Vehicle Glass, Tire, Automotive Exteriors, Fabric
Compatible Substrates & Surfaces:Leather, Plastics
Chemical Family:Silicones
Features:Surface Smoothing, Levelling, Water Resistant, Hydrophobic, Good Surface Gloss, Low Viscosity, Good Stability, Good Surface Care, Enhances Color, Excellent Compatibility, Long Term Protection, Gloss, Good Color Stability, Water Repellent, Excellent Hydrophobic Properties, Degreasing, Color Stability, Rub Off Effect, Protects Metal Surfaces, Excellent Drying Properties, Excellent Durability

ICM EM 1612 is a microemulsion featuring a unique aminofunctional silicone. This specialized aminosilicone is crafted for the swift and effective hydrophobing and protection of diverse automotive surfaces. It is well-suited for applications in automotive care, including leather treatment, fabric care, and glass treatments.

CHT Group QSil 223

Product Type:Encapsulant, 2K (2 component) Adhesive, Potting Compound
Application Area:Sensors, Aerospace Applications, LEDs, Optical Applications
Cure Method:Chemical Cure
Chemical Family:Silicones

CHT Group QSil 223 is a transparent and colorless silicone formulation that is ideal for optical applications. Its viscosity profile enables excellent flow around components, and it is excellent for potting complex parts. The chemical composition results in a cured product that is hydrolytically stable as well as reversion-resistant. The silicone elastomer provides electrical insulation and physical shock resistance for components and enables environmental protection.

ICM EM 1610

Product Type:Repair Paint, Automotive Polishes
Application Area:Car, Automotive Applications, Automotive Engine, Vehicle Glass, Tire, Automotive Exteriors
Compatible Substrates & Surfaces:Plastics
Chemical Family:Silicones
Features:Surface Smoothing, Facilitates Water Sheeting, Excellent Gloss Potential, Levelling, Water Resistant, Hydrophobic, Good Surface Gloss, Low Viscosity, Good Stability, Good Dilution Stability, Good Surface Care, Facilitates Water Beading, Enhances Color, Long Term Protection, Gloss, Good Color Stability, Water Repellent, Excellent Hydrophobic Properties, Degreasing, Color Stability, Rub Off Effect, Excellent Drying Properties, Excellent Durability, Beading

ICM EM 1610 is a microemulsion featuring a unique aminofunctional silicone. This specialized aminosilicone is specifically designed for rapid and effective hydrophobing and protection of various automotive surfaces. ICM EM 1610 is particularly well-suited for key applications in automotive care, including car wash applications.

CHT Group QSil 553

Product Type:Encapsulant, 2K (2 component) Adhesive, Potting Compound, Solvent free (100% Solids) Adhesive
Application Area:Electronic Control Units, Aerospace Applications, Insulators
Cure Method:Chemical Cure
Chemical Family:Silicones

CHT Group QSil 553 is a 2-component silicone elastomer system specially designed for electronic potting and encapsulation applications. It offers good protection against chemicals, environmental contamination, mechanical shock, vibration, and impact damage. It can be employed in areas where low flammability is a prerequisite. The cured elastomer can be repaired. The component parts have relatively low viscosities and are readily mixed, either by hand or machine.

CHT Group AS1811

Chemical Family:Silicones
Product Type:1K (1 component) Sealant, 1K (1 component) Adhesive, Solvent free (100% Solids) Sealant, Solvent free (100% Solids) Adhesive
Application Area:Electronic Components, Thermal Management Application
Application Method:Gun, Pneumatic Gun
Features:Fast Cure, Non Corrosive, Thermally Conductive, Low VOC, Good Adhesion, Excellent Multi-Substrate Adhesion, Primerless, Room Temperature Vulcanizing

CHT Group AS1740

Chemical Family:Silicones
Product Type:1K (1 component) Sealant, Potting Compound
Cure Method:Moisture Cure
Application Area:ADAS (Advanced Driver Assistance Systems), Aerospace Applications, On-board Charger, EV Charging Stations, Driving Support System, Control Units, Inverter, Automotive Converter, Electric Motors, Brake System, Battery Management System (BMS), Passenger Protection System, Fiber Optic Cables, Compressors, Sensors
Application Method:Gun
Compatible Substrates & Surfaces:Aluminum, Steel, Metal, Copper, Composites, Brass

CHT Group AS1740 is part of a range of high-performance RTVs. It is a neutral cure silicone sealant specifically designed to meet the physical, chemical, and temperature resistance requirements of MIL-A-46146B. It features exceptional physical properties and is compatible with many sensitive substrates, including copper, brass, steel, aluminum, and FR4, making this an ideal option for many electronic applications where high performance is paramount. The alkoxy cure system produces a silicone sealant with excellent adhesion to most common substrates.

Silcoset 153

Chemical Family:Silicones
Product Type:1K (1 component) Sealant, 1K (1 component) Adhesive
Application Area:Aerospace Applications
Application Method:Gun, Pneumatic Gun
Compatible Substrates & Surfaces:Enamel, Thermoplastics, Glass, Steel, Ceramic, Thermosetting Plastics, Wood, Metal, Non-ferrous Metal, Aluminum, Ceramic Fabrics
Features:Room Temperature Vulcanizing, Good Weather Stability, Improved Ageing Resistance, Fast Cure, Room Temperature Curing, Good Adhesion, Excellent Multi-Substrate Adhesion, Primerless

Silcoset 153 is a solvent-free, 1-part RTV (Room Temperature Vulcanizing) silicone adhesive sealant in the acetoxy cure product line. With excellent primer-less adhesion, it adheres well to various substrates, including aluminum, non-ferrous metals, steel, glass, enameled surfaces, fabrics, ceramics, thermosetting and thermoplastics, and wood. Rapid room temperature curing, triggered by atmospheric moisture, streamlines projects and enhances efficiency.

CHT Group QSil 58

Product Type:2K (2 component) Adhesive, Potting Compound, Encapsulant
Cure Method:Moisture Cure
Chemical Family:Silicones

CHT Group QSil 58 is a high-temperature, self-leveling, two-component silicone material that is primarily used for potting applications. The two applicable catalysts are 0.5% DBT by weight and 10% deep-section catalyst by weight. The 0.5% catalyst level can be increased or decreased to obtain the desired cure speed. Cure speed can be accelerated by adding DBT catalyst in 0.1% increments. This can be catalyzed with a 10% deep-section catalyst for applications requiring a deeper cure. The material can also be vulcanized at temperatures up to 70°C to increase cure speed.

CHT Group ACC15

Product Type:Conformal Coating, Solventless & High Solids Coating, 1K (1 component) Coating
Features:Excellent Transparency Properties, Low Viscosity, Good Toughness, High Solids Content, Low Odor, Excellent Substrate Adhesion
Application Area:ADAS (Advanced Driver Assistance Systems), Printed Circuit Boards, Aerospace Applications, Control Units, Battery Management System (BMS), Passenger Protection System, Electric Vehicle (EV) Batteries, Driving Support System
Application Method:Brush, Dip Coating, Spray
Chemical Family:Silicones

CHT Group ACC15 is a low-viscosity, 1-component, condensation-curing silicone coating. The uncured product can be applied by pouring or brushing and is readily cured into a tough, transparent rubber. It can be used to coat printed circuit boards to prevent the ingress of water and environmental contaminants.

CHT Group AS1707

Product Type:Solvent free (100% Solids) Sealant, 1K (1 component) Sealant
Application Area:Automotive Converter, Sensors, Electronic Control Units, Passenger Protection System, PTC Heater, Electric Motors, EV Charging Stations, Battery Management System (BMS), Driving Support System, Inverter, Brake System, On-board Charger, Aerospace Applications, Control Units, ADAS (Advanced Driver Assistance Systems), Electric Vehicle (EV) Batteries
Cure Method:Moisture Cure
Application Method:Gun
Chemical Family:Silicones

CHT Group AS1707 is a non-corrosive, neutral-cure, 1-part, RTV (Room Temperature Vulcanizing) silicone adhesive sealant. It is one in a range of alkoxy cure products that are solvent-free. It exhibits excellent primerless adhesion to many substrates and cures at room temperature to form a tough rubber when in contact with atmospheric moisture. This product will not corrode copper or its alloys and is suitable for use with electronic components.

CHT Group AS1821

Chemical Family:Silicones
Product Type:1K (1 component) Sealant, Potting Compound, Solvent free (100% Solids) Sealant
Cure Method:Air Dry, Moisture Cure
Application Area:ADAS (Advanced Driver Assistance Systems), On-board Charger, EV Charging Stations, Driving Support System, Control Units, Inverter, Connectors, Automotive Converter, Electric Motors, Brake System, Battery Management System (BMS), Passenger Protection System, Compressors, Sensors
Application Method:Gun

CHT Group AS1821 is a non-corrosive, neutral-cure, 1-part, RTV (Room Temperature Vulcanizing) silicone adhesive sealant. It is one in a range of acetone-cure products that are solvent-free. It exhibits excellent primerless adhesion to many substrates and cures rapidly at room temperature to form a tough rubber when in contact with atmospheric moisture. This product will not corrode copper or its alloys and is suitable for use with electronic components.

ICM 1651

Product Type:Water Repellant
Application Area:Vehicle Glass, Car Body Components, Glass Surface
Features:Self Cleaning, Good Surface Care, Easy To Apply, Long Lasting, Hydrophobic

CHT Group SilSo Bond 14000

Product Type:Solvent free (100% Solids) Sealant, 1K (1 component) Sealant
Application Area:Control Units, ADAS (Advanced Driver Assistance Systems), Electric Vehicle (EV) Batteries, Automotive Converter, Sensors, Gaskets, Passenger Protection System, PTC Heater, Electric Motors, EV Charging Stations, Battery Management System (BMS), LEDs, Driving Support System, Electrical Components, Inverter, Seals, Brake System, Air Circulation System, On-board Charger
Compatible Substrates & Surfaces:Metal, Polycarbonate (PC), Copper
Cure Method:Air Dry, Moisture Cure
Application Method:Gun
Chemical Family:Silicones

CHT Group SilSo Bond 14000 is a non-corrosive, neutral-cure, 1-part, RTV (Room Temperature Vulcanizing) silicone adhesive sealant. It is one in a range of alkoxy cure products that are solvent-free. It exhibits excellent primerless adhesion to many substrates and cures at room temperature to form a tough rubber when in contact with atmospheric moisture. This product will not corrode copper or its alloys and is suitable for use with electronic components.

Silcoset 158

Chemical Family:Silicones
Product Type:1K (1 component) Sealant, 1K (1 component) Adhesive
Application Area:Aerospace Applications, Form In Plastic Gaskets (FIPG), Ovens
Application Method:Gun, Pneumatic Gun
Compatible Substrates & Surfaces:Enamel, Thermoplastics, Glass, Steel, Ceramic, Thermosetting Plastics, Wood, Metal, Non-ferrous Metal, Aluminum, Ceramic Fabrics
Features:Room Temperature Vulcanizing, Good Weather Stability, Improved Ageing Resistance, Fast Cure, Room Temperature Curing, Good Adhesion, Excellent Multi-Substrate Adhesion, Primerless

Silcoset 158 is a solvent-free, 1-part RTV (Room Temperature Vulcanizing) silicone adhesive sealant within the acetoxy cure product line. This versatile adhesive exhibits excellent primer-less adhesion to diverse substrates, including aluminum, non-ferrous metals, steel, glass, enameled surfaces, fabrics, ceramics, thermosetting, thermoplastics, and wood. It is highly resistant to weathering and aging. In contact with atmospheric moisture, it cures rapidly at room temperature. Silcoset 158 streamlines your bonding projects.

CHT Group AS1803

Product Type:Solvent free (100% Solids) Sealant, 1K (1 component) Sealant
Application Area:Automotive Converter, Sensors, Passenger Protection System, PTC Heater, Electric Motors, EV Charging Stations, Battery Management System (BMS), LEDs, Driving Support System, Inverter, Brake System, On-board Charger, Aerospace Applications, Control Units, ADAS (Advanced Driver Assistance Systems), Electric Vehicle (EV) Batteries
Cure Method:Air Dry, Moisture Cure
Application Method:Gun
Chemical Family:Silicones

CHT Group AS1803 is a non-corrosive, neutral-cure, 1-part, RTV (Room Temperature Vulcanizing) silicone adhesive sealant. It is one in a range of acetone-cure products that are solvent-free. It exhibits excellent primerless adhesion to many substrates and cures rapidly at room temperature to form a tough rubber when in contact with atmospheric moisture. This product will not corrode copper or its alloys and is suitable for use with electronic components.

CHT Group SilSo SE2014

Product Type:2K (2 Component) Potting Compound, Potting Compound, Encapsulant, 2K (2 Component) Encapsulant
Application Area:Umbilical Cable, Cables
Chemical Family:Silicones
Features:Light Weight, Vibration Resistance, Chemical Resistant, Impact Resistance, Long Potlife, High Dielectric Strength, Low Viscosity, Low Density, Good Mechanical Resistance, Mechanical Shock Resistance

Show

of 41 results