Coolant Control

Cuprisan is a unique waste treatable copper complex designed to neutralize odor causing sulfides and reactive cations such as Al+3 and Fe+2. Cuprisan can be added tank-side or formulated into the coolant concentrate to provide long term odor control. Cuprisan works synergistically with biocides. When used with an Isothiazolinone-based microbicide, as little as 20% of the normal dosage is required to attain a complete kill and maintain a controlled fluid. Cuprisan will immediately eliminate and prevent the recurrence of most coolant-borne odors such as the common rotten egg smell and will aid in the stabilization of water-based cutting fluids.

J-Cut NCL-18 is a moderate to heavy duty dual purpose cutting oil developed to machine a wide variety of metals without the need for chlorinated additives. The extreme pressure lubricants are balanced to provide ease of cut with minimal tool wear. An effective anti-mist additive is incorporated into the J-Cut NCL-18 to reduce misting of the cutting oil during high speed machining operations.

Cutrite 3012H is formulated for light to moderate machining and grinding of ferrous metals including cast iron. Utilizing synthetic oils, it was engineered to impart maximum cooling and load carrying characteristics. Cutrite 3012H provides long lasting performance in both individual and central systems.

Athena 46 is a anti-wear hydraulic oils formulated with highly refined paraffinic base oils. It provides excellent anti-wear protection, oxidation and corrosion inhibition as well as foam and aeration suppression. It have excellent demulsibility characteristics.

Hercules EP 4 is an extreme pressure industrial gear oil fulfills the requirements of DIN 51517-3 for CLP type gear oils and U.S. Steel 224 performance. Hercules EP 4 offers good wear protection, safety against scuffing, aging resistance and a high thermal endurance. In addition, the product behave neutral towards conventional seals and bearing metals.

GHO-5555 is medium viscosity high performance shaving and hobbing oil. GHO-5555 contains an oiliness additive for additional performance, especially on draggy, soft metals. It is designed primarily for gear hobbing, form grinding, and gear cutting where pressurized coolant systems are used.

Olympus 100 is a anti-wear hydraulic oils formulated with polyalphaolephin synthetic oils. It provides excellent anti-wear protection, oxidation and corrosion inhibition as well as foam and aeration suppression. It has excellent demulsibility characteristics. It is formulated to provide outstanding low- and high-temperature performance and equipment protection up to three times longer than comparable conventional products.

Vulclean FC-5551 is a non-flammable heavy-duty liquid detergent concentrate designed to be diluted with water for general maintenance cleaning. Vulclean FC-5551 is highly recommended for use in the hand cleaning of soiled shop machinery and, because of its fast drying and low foaming characteristics, it is also recommended for use in mechanical floor scrubbing equipment.

Hercules EP 1 is an extreme pressure industrial gear oil fulfills the requirements of DIN 51517-3 for CLP type gear oils and U.S. Steel 224 performance. Hercules EP 1 offers good wear protection, safety against scuffing, aging resistance and a high thermal endurance. In addition, the product behave neutral towards conventional seals and bearing metals.