Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Applications
- Application Method
- Cure Method
- Application Method
- Screen-print
Properties
- Color
- Typical Properties
- Typical Cured Properties
- Properties
- Solderable - No
| Value | Units | Test Method / Conditions | |
| Conductivity | 0.04 | ohms/sq/mil | — |
| Value | Units | Test Method / Conditions | |
| Viscosity | 30,000 - 40,000 | cps | — |
| Filler | Silver | — | — |
| Percent Silver (cured) | min. 90 | — | — |
| Volume Resistivity | 8.0e-05 | Q-cm | — |
| Sheet Resistivity | 0.03 | Q/sq/mil | — |
| Hydrolytic Stability | Excellent | — | — |
| Useful Temperature Range | -55 to 350 | ºC | — |
| Thermal Stability | Good to 410 | °C | — |
| Wet Coverage | 19.5 | inlgm/mil | — |
| Specific Gravity | 3.1 | — | — |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety & Handling
Use with adequate ventilation. Keep away from sparks and open flames. Avoid prolonged contact with skin and breathing of vapors. Wash with soap and water to remove from skin.
Storage & Handling
- Shelf Life
- 6 months at 5°C, 1 month at 25°C, 12 months at -10°C
- Suggested Handling & Curing
110-19UT is ready to use as supplied. Further thinning may be accomplished by adding small amounts of CMI thinner 102-03. Prior to using, be certain to resuspend silver. Best properties for most applications result when pre-curing for half an hour at 150°C followed by curing for 60 minutes at 250°C. Good properties are obtained on a variety of substrates by dry and curing at temperatures ranging from 180°C to 250°C. End user is advised to experimentally determine temperature and time best suited for individual applications.