Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Applications
- Application Area
- Application Method
Properties
- Typical Properties
- Typical Cured Properties
Value | Units | Test Method / Conditions | |
Conductivity | 0.015 | Ω/sq/mil | — |
Value | Units | Test Method / Conditions | |
Viscosity | 22,000 - 28,000 | cps | — |
Filler | Silver | — | — |
Percent Silver (cured) | min. 88 | — | — |
Volume Resistance | max. 0.000045 | Ω-cm | — |
Sheet Resistivity | 0.015 | Ω/sq./mil | — |
Hydrolytic Stability | Excellent | — | — |
Useful Temperature Range | -55 to 200 | ºC | — |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety & Handling
- Use with adequate ventilation.
- Keep away from sparks and open flames.
- Avoid prolonged contact with skin and breathing of vapors.
- Wash with soap and water to remove from skin.
Storage & Handling
- Shelf Life
- 2 months at 25˚C, 6 months at -10°C,
- Suggested Handling & Curing
120-07(LPS) is ready to use as supplied. Further thinning may be accomplished by adding small amounts of thinner 124-13. Prior to using, be certain to resuspend silver. Best properties, for most applications, result when cured for a few minutes at 175°C. Good properties are obtained on a variety of substrates by dry and curing at temperatures ranging from 110°C to 180°C. Not recommended for applications that cannot cure above 110°C. End user is advised to experimentally determine temperature and time best suited for individual applications.
- Shelf Life
- 6 months at -10°C, or 2 months at 25˚C in unopened containers