Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Applications
- Application Method
- Cure Method
- Application Method
- Screen-print
Properties
- Color
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Conductivity | 0.008 | ohms/sq/mil | — |
| Viscosity | 35000 | cps | — |
| Filler | Silver | — | — |
| Percent Silver (cured) | min. 84 | — | — |
| Volume Resistance | max. 0.00002 | Ω-cm | — |
| Sheet Resistivity | 0.008 | Ω/sq/mil | — |
| Hydrolytic Stability | Excellent | — | — |
| Useful Temperature Range | 55 to 200 | ºC | — |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety & Handling
- Use with adequate ventilation. Keep away from sparks and open flames. Avoid prolonged contact with skin and breathing of vapors. Wash with soap and water to remove from skin.
Storage & Handling
- Shelf Life
- 2 months at 25°C, 6 months at 5°C, 12 months at -10°C
- Suggested Handling & Curing
126-33 is ready to use as supplied. Further thinning may be accomplished by adding small amounts of CMI thinner 102-03 or Isophorone. Prior to use, be certain to mix well to re-suspend silver. Best properties for most applications result when cured for 3 to 5 minutes at 175°C. Excellent properties are also obtained on a variety of substrates by curing at temperatures ranging from 110°C to 180°C. Not recommended for applications that cannot cure above 110°C. End user is advised to experimentally determine temperature and time best suited for individual applications.