Creative Materials 127-07

127-07 is an ink/coating with high electrical conductivity for application by screen-printing, dipping and syringe dispensing. The product features excellent adhesion to Kapton, Mylar, and a variety of other substrates. The superior conductivity of this product allows the end user to print narrower and/or longer circuit trace lines or thinner coatings without compromising overall maximum ohm values. The proper use of this feature can result in a significant cost saving or enhanced performance. This product is more flexible and elastomeric than traditional conductive inks. Some applications for 127-07 include, but are not limited to, RFID antennae, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, and membrane switches and it has shown to have conductivity at up to 200% elongation.

Features

  • Elastomeric conductive ink

Application Area: Circuit Substrates, Membrane Touch Switch, Polymer Tantalum Capacitor

Compatible Substrates & Surfaces: Glass, Plastics, Polyimide

Features: Cost Effective, Crease Resistance, Electrically Conductive, Electromagnetic Shielding (EMI), Good Abrasion Resistance, Good Adhesion, Good Scratch Resistance, High Hydrolytic Stability, Radio Frequency Shielding (RFI)

Color: Silver

Application Method: Dip Coating, Injection, Screen Coating

Chemical Family: Silver & Silver Compounds

Technical Data Sheet

Knowde Enhanced TDS

Identification & Functionality

Features & Benefits

Applications & Uses

Compatible Substrates & Surfaces
Cure Method

Properties

Color
Typical Properties
ValueUnitsTest Method / Conditions
Viscosity18,000- 25,000cps
FillerSilver
Percent Silver (cured)min. 84
Volume Resistancemax. 0.00002Ω-cm
Sheet Resistivity0.008Ω/sq/mil
Hydrolytic StabilityExcellent
Useful Temperature Range-55 to 120ºC
Conductivity0.008ohms/sq/mil

Regulatory & Compliance

Certifications & Compliance

Technical Details & Test Data

Test Data

Creative Materials 127-07 - Test Data

Storage & Handling

Shelf Life
6 months
Suggested Handling & Curing

127-07 is ready to use as supplied. Further thinning may be accomplished by adding small amounts of CMI thinner 113-12. Prior to use, be certain to mix well to re-suspend silver. Best properties for most applications result when cured for 3 to 5 minutes at 175°C. Excellent properties are also obtained on a variety of substrates by curing at temperatures ranging from 50°C to 180°C. End user is advised to experimentally determine temperature and time best suited for individual applications.

Safety & Handling
  • Use with adequate ventilation. Keep away from sparks and open flames. Avoid prolonged contact with skin and breathing of vapors. Wash with soap and water to remove from skin.