Knowde Enhanced TDS
Identification & Functionality
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Materials Features
- Product Highlights
- NEOFLON EFEP RP-4020 which owns low melting point is a copolymer of ETFE and additional third monomer.
- Due to its low melting point, a laminated product such as a multi-layer tube and film with EVOH can be obtained by co-extrusion molding.
- Hot melt adhesion to the other plastics such as Polyamide with its reactive group.
- Excellent process ability and high transparency.
- It can be melt-molded as a thermoplastic resin by extrusion molding, injection molding, compression molding and the like.
Applications & Uses
- Applications
- Compatible Polymers & Resins
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Physical Properties
- Note
*The above values are representative values, not guaranteed values.
Value | Units | Test Method / Conditions | |
Elongation | 450 | % | ASTM D 3159 Compliant |
Melting Point | 160 | °C | ASTM D 3159 Compliant |
MFR (at 265°C, 49N Load) | 35 | g/10min | — |
Specific Gravity | 1.74 | — | ASTMD 729 Compliant |
Tensile Strength | 40 | MPa | ASTM D 3159 Compliant |
Safety & Health
- Handling Method / Safety Information
- Be sure to read the notes on SDS and labels before use.
- This product is intended for general industry, and therefore its adequacy and safety as a raw material for medical purposes cannot be guaranteed.
Packaging & Availability
- Packing Specification
50 Kg